Tubular Heater Equipment
12 Group Tubular Heater Shrinking Machine （SG12A withgear box）
- Item No.: SG12A
- Rotating speed of Roller: 60rpm
- Roller dimension: outside diameter 98.5 mm; inside diameter 45 mm;
thickness 38 mm
- Motor power (single): 0.75KW
SG12A reducing machine
Reduce heater to increase density;
- The best reference range to shrink (mm): 4-9.5mm variety of
specificationslength shorter than 2 meter(within the reference
range, the life of the equipment will be longer)
- Suitable tubes' material: copper, aluminum, iron, stainless steel
- Suitable tube's shape: round;
- Shrinking speed: uniform speed, non-uniform speed (according to the
demand of customer).
- Change roller or roll assemble can reduce different diameter;
- Can match with our feeding machine to increase of efficiency;
- Can match with our marking mechanism for mark your brand heaters.
Round heater reduce, such as tubular heater.Information need for order SG12A roll reducing machine
- Tube diameter before and after reduce, such as 8-6.6mm
- Length before reduce
- Electrical supply (for example, 1 phase in 220v , 3 phase in 380V,
The SGA rolling reducing machine is to make up for the
short-comings of the SGA-2 model. The machine adds gearbox to the
drive to increase the bearing capacity and increase the torque.
Model: SG8A 8 station, SG12A 12 station.
Features: compared with the SGA-2 machine, the torque is large and
the strength is increased.
Recommended range of reducing tube: within 3.5-16mm.
A style reducing machine Main models and technical parameters
tube diameter to reduce
Min length to reduce
rotating speed of roller
Power supply single / total power
SGA reducing machine
vertical or horizontal two styles
3.5-16mm round/ square/flat
/ elliptical pipe
Between 20-70 rpm
380V 50HZ /0.75KW / 9KW
PREVIOUS：Copper Guide Sleeve For Roller Reducing Machi NEXT：Flat Tubular Heater Shrinking Machine