Fully automatic continuous drawing hard box vacuum packing machine
I. product introduction:
Automatic continuous stretch air hardening box vacuum packaging
machine must use a forming mold, the first film heating, and then
use the forming mold to flush into the shape of the container, and
then the packaging into the molding of the lower film cavity, then
vacuum packaging. The film used in deep drawing packaging is deep
drawing film, which is divided into soft film and hard film. The
film has the characteristics of good formability, high
transparency, oxygen barrier, heat resistance, tight connection,
flat, excellent anti-fog and easy to open and seal.
Ii. Performance characteristics
1. Each equipment of the automatic continuous stretch air hardening
box vacuum packaging machine is equivalent to a packaging assembly
line, which only requires manual feeding in the whole process, and
the rest links are fully automatic, which can save labor and
improve work efficiency at the same time.
2, equipped with power phase, reverse phase, high voltage, low
voltage, leakage protection system, easy to operate and adjust.
Safety switch and protective cover are installed in molding room,
heat sealing room, cross cutting knife and vertical cutting knife
3. It can be filled with nitrogen or mixed gas on the basis of
vacuuming according to the requirements of product packaging.
Iii. Main technical parameters
Iv. After-sales service
1. The warranty period of the equipment is one year, and lifelong
maintenance and technical support are provided.
2. If there is any problem in the use of the equipment, it shall be
solved by telephone first. If the problem cannot be solved by
Local after-sales staff will be arranged to carry out on-site
maintenance of equipment.
3. In case of any failure of the equipment within the warranty
period, spare parts shall be replaced and maintained free of
charge. If spare parts are to be replaced after the warranty
period, only the cost shall be charged, and effective services
shall be provided to the user in a timely manner.
4. Free installation and debugging for users and operator training,
and the customer can also send 1-2 personnel to the company for
free operation training and simple maintenance training.
Contact person: Manager li
Contact number: 15553627535
Sales QQ: 1798795753
E-mail: 1798795753 @qq.com
Share this post: