X-10 Pen Gas Leak Detector
It’s composed of high sensibility metallic oxide MOS sensor. It has
high sensibility .
Audio & triple color light flash alarm
One stroke of grip, tiny shape with vogue design
It’s suitable for home domestic gas leak detection
Product item: pen gas leak detector
Battery automatic shutdownabout 5 minutes (no any operation at that
High alarm valueabout 2000 PPM
Low alarm valueabout 500 PPM
Preheat time15∽30 S
Start: long press on start button ,release when LED is lit.
Preheat:after starting it ,the indicating light will be circularly
lit. After preheating ,the detector will stop circulating the
indicating lights, and enter into normal gas detection procedure.
Detection: When entering into normal gas detection procedure, the
buzzer will resonate intermittently ,and will continue lighting the
green indicating light. (If the green indicating light flashes ,it
shows the battery capacity is less than 30%,it should be replaced
with a new battery ).When the sensor of the detector is approaching
to area where there should be detected, the sensor will indicate
value according to gas concentration of detected area. Yellow light
shows there exists minor gas leak in this area; red light shows
there exists serious leak of gas or high gas concentration in this
Power offlong press start button ,release when all indicating
lights quenches and it’s power off. Or imposing the detector on the
open surroundings where there are no gas ,after 5 minutes ,it will
be power off automatically .