Sign In | Join Free | My disqueenfrance.com
China Guangzhou Fcard Electronics Co.,Ltd logo
Guangzhou Fcard Electronics Co.,Ltd
ICP Remarked Supplier
Home >

FC-901 Access Control Power Supply

Guangzhou Fcard Electronics Co.,Ltd

FC-901 Access Control Power Supply

Country/Region china

Company Guangzhou Fcard Electronics Co.,Ltd

Categories Access Control Power Supply

Update 2017-05-03 10:38:25

ICP License Issued by the Chinese Ministry

Contact Now

Product Introduction

The power supply is absolutely high-grade electronic components, the use of international advanced manufacturing process technology processes,quality must be reliable.

Power locks Power Supply Controller Description

First,the basic description:

The power supply is absolutely high-grade electronic components,the use of international advanced manufacturing process technology processes,quality must be reliable.

Second,the scope:

The power supply is suitable for building intercom,access control various access devices,especially for driving various types of electronic locks.

Three features:

1. AC input:220V/50HZ,DC Output:regulated 12V,the standard output current 3A/5A;

2. The direct control of the electronic locks,access control can reduce the load,interference,save project wiring,reducing failure risks;

3. Set NO/NC (normally open/ normally closed)interface,can control various types of electronic locks;

4. Set time delay circuit,lock time can be adjusted in the 0-15 seconds;

5. Automatic protection function,causing a short circuit when the circuit accident occurs, the power supply will be temporarily disconnected or burning fuse;

6. Remote control,remote control module can be inserted using the remote control to open the door remotely.(Remote from Leaving Wide ground without interference of 80 meters)

Fourth, Dimensions:205mm high x 165mm wide x 74mm deep(large box)

180mm long x 80mm wide x 60mm high (small box)

Wiring Diagram:

Cabling Instructions:

1-2: Regulated output DC12V,1 positive ,2 negative

2-3: Open button connection terminal can be connected to switch output(relay output).

3: Low-frequency signal output,connected to access controller signal lines.

4-5: NO -GND,normally open no power output,trigger output DC12V-17V,4 positive 5 negative.

5-6: NC -GND, normally closed output DC12V-17V ,triggering power outages,6 are positive ,5 negative.

6-7: The high-frequency signal output, on the positive lock.

7-8: Connect the host building intercom lock signal input interface,7L +,8 of L - + 8,- 9 for the building intercom unlock signal,L +,L - input port, or as high as + 8 radio frequency input,- 9 is low frequency input(this only C plate)


Product Tags:

12v 1.2 a power supply

      

12v 3.5 a power supply

      

tripod turnstile gate access control

      
China FC-901 Access Control Power Supply

FC-901 Access Control Power Supply Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Guangzhou Fcard Electronics Co.,Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0