DCPD hydrogenated C5 petroleum resin is made up of ethylene
cracking C5 fraction of unsaturated fatty hydrocarbon and aromatic
hydrocarbon by polymerization of light color thermoplastic resin.
Density is about 1.0 and soluble in organic solvents, such as
benzene, toluene, xylene, various types of solvent oil, etc, but
not dissolve in water. Its appearance is granular solid and white
or yellow. It is fragile, easy to dust, non-toxic, tasteless and
non flammable items.
Take HC5-100D for example:SPECIFICATIONS
|Softening Point (R&B)||95-105||ASTM E 28|
|Color Grade (Ga#)||0-1||ASTM D6166|
|Color Grade (Ga#) 50% toluene||0||GB/T 1722|
|Softening Point (R&B)||103||GB/T 2294|
|Acid Number (KOH mg/g)||0.052||GB/T 2895|
|Ash content||0.074||GB/T 2295|
|Viscosity BRF,( @200℃,mpa.s)||149||GB/T 2794|
Pressure sensitive adhesive
Hot melt adhesive
Tire rubber IndustrialPACKAGE
25 kg craft paper bags, big bags of 500kgs.STORAGE
Pelletized forms of resins may block or lump in hot weather
climates or if stored near heat sources. Inside Storage is
recommended and keep at temperature not exceeding 30 degrees.
We can provide all kinds of resins with good quality and lowest
price all around China . Our resins are exported to Thailand ,
Korea , Turkey , Brazil ,and other countries .It is popular with
the customers .
If you are interested , we can provide you TDS and some free
samples for your test . It must be a good begining of our
cooperation .Attached is our price list for your reference .