Stainless Steel Filter Cartridge
Stainless steel filter cartridge will help you keep dust from
coming out of the top of a hopper. The mesh filter might get
clogged up over time and the dust vibrated or shaken free.
Overcome the temperature and compatibility limitations of fabric or
synthetic fiber cartridges by replacing them with these stainless
steel wire cloth elements. They're good up to 500 °F instead of the
usual 250 °F, and they are unaffected by most caustic fluids. Made
entirely of 304 or 316 stainless steel, they are cleanable and
reusable, and can withstand differential pressures up to 60 psi.
(500 psid units are also available.) You can choose particle
retention ratings as fine as 5 microns. Element surfaces can be
plain cylindrical, or pleated to increase surface area. Pleated
units rated 100 microns or finer have an underlying support layer
of coarser mesh to prevent pleat collapse. Fabrication is by
welding and crimping; no silver brazing or epoxy bonding is used.
Normally all stainless steel pleated & cylindrical filters are
supported with coarser filter media to ensure any direct damages to
main filtering media under process upsets. A bubble point tests can
be done to certify that no opening larger than the specified pore
size exist in product joints or seams.
No media migration due to stainless steel material. These elements
can be back washed & reused.
SSFC-01: Stainless steel filter cartridge: perforated filter cartridge,
pleated filter cartridge, woven filter cartridge.
Type Of Filters:
- Stainless steel wire mesh type.
- Stainless steel sintered metal type.
- Stainless steel random fiber / Sintered metal fiber type.
SSFC-02: Woven wire mesh filter cartridge.
SSFC-03: Sintered wire mesh filter cartridge.
SSFC-04: Sintered metal fiber for making filter cartridge.
Type Of Filter Design
- Plain cylindrical design.
- Pleated configuration design.
SSFC-05: Plain weave cylinder cartridge.
SSFC-06: Stainless steel pleated filter cartridge.
Construction of Sintered Material
The composite fiber material is then sintered together with a wire
mesh under vacuum conditions and rolled to mats of a specific
thickness. Stainless Cartridge can be wrought into tubes,
cartridges or disks, plain, pleated or according to customer
SSFC-07: Construction of sintered filter.
Features & Benefits
- Stable pore shapes.
- High permeability.
- Low pressure drop.
- High dirt-holding capacity (longer lifetime).
- High temperature resistance.
- High differential pressure with stand capacity.
- Strong corrosion resistant.
- Back flushing.
- Excellent mechanical strength.
- No media migration.
- Size customization.
|Sizes||10", 20",30"40" Long (Customized Sizes Are Available)|
|Micron Rating||0.5, 1, 3,5,10, 20, 25, 50 & More|
|Standard Outside Diameter||64mm|
- Double Open Type (DOE Type).
- Code 7 F (226 O Ring Design).
- Code 7 S (226 O Ring Design/flat).
- Code 3 F (222 O Ring Design).
- Code 3 S (222 O Ring Design/flat).
- 1" NPT / BSP Connection.
SSFC-08: Filter cartridge with double open end.
SSFC-09: Filter cartridge with single open end.
SSFC-10: Perforated filter cartridge with flat edge.
SSFC-11: Filter cartridge with raised flange.
Catalyst Recovery In Petrochemical / Chemical Industries
- Polymer Filtration.
- Cross Flow Filtration.
- Gas Filtration.
- Analytical Devices.
- Medical devices.
- Oil Filtration.
- Aerosol Application.
- Gas-Liquid Separation.
- Hot Gas Filtration.
- Fuel & Hydraulic Oil Filtration.
- R.O. Pre Filtration.
Inquiry for Our Product
Boegger Industrial Limited
When you contact us, please provide your detail requirements. That
will help us give you a valid quotation.
- your name *
- Your email *
- message *