Boegger Corporation manufacture full range of wire mesh suction
strainers for export to Germany, Singapore, America, etc. Extra
caution should be taken to ensure that the suction elements are
always mounted below the minimum oil level of the reservoir.
Standard models have nominal filtration ratings of 74 or 125
The suction strainer elements can also be supplied with a bypass
valve to reduce high pressure drops caused by contaminated elements
or high viscosity fluids during cold starting. The bypass valve
opens at 3 psi. For best results, suction strainer elements should
be sized for clean element pressure drops off no higher than 0.
5 - 0.07 psi.
SS-01: Different type suction strainers.
Boegger suction strainers are manufactured using stainless steel
wire screen media. Standard Stainless Steel type 304: The basic
stainless alloy (18% chrome, 8% nickel) and the most extensively
used to weave wire cloth. It has excellent corrosion resistance
which is satisfactory for most applications. Where no type is
specified, it is assumed that type 304 is acceptable.
Stainless Steel type 316: The same characteristics as type 304 with
an additional 2% molybdenum to provide increased corrosion
resistance to salts and acids. In addition it has increased
strength at high temperatures.
Standard brass (copper 65%, zinc 35%) has high strength and
ductility for severe cold with a mild corrosion resistance.
A high nickel copper alloy which is one of the most widely used
alloys for corrosion resistance. It has the strength of a mild
steel and will not corrode in a great many solutions found in
Limited availability and lead times apply. Besides the materials,
outside sizes and filtration rating can be produced according to
SS-02: Suction strainer with brass edge.
SS-03: Suction strainer with stainless steel edge.
SS-04: A plain weave suction strainer.
SS-05: Suction strainer without edge.
SS-06: Suction strainer with bend edge.
SS-07: Flat end suction strainer.
Inquiry for Our Product
Boegger Industrial Limited
When you contact us, please provide your detail requirements. That
will help us give you a valid quotation.
- your name *
- Your email *
- message *