Wireless Dmx512 Transceiver Dmx512 Console Data To The Wireless
Transmission Of Standard Lamps
And Lighting Can Also Be Transmitted On-Line Data.
The Product Is Completely Solved The Wireless Transmission Of Data
Between The Console Lights And
Lamps, Lamp And Lamp completely Remove The Long Dependent On
Leading Wireless DMX 512 Transmitter And Receiver Wireless DMX
Data Transmission Process To Be Done Without Delay, Real-Time Data
The Product Uses 2.4g Global Open Ism Band, License-Exempt
Use,Efficient Gfsk Modulation,
79 Channel High-Speed Frequency Hopping (Fhss) Communication
Design, Strong Anti-Interference Ability.
Wireless DMX512 Can Be Used In All DMX Lamp !!!
1. No time delay during data transmission
2. 7 groups ID code settable
3. Portable and easy to handle
5. Small size: 13.5cm x 2cm x 2cm only
6. One transmitter can control many receivers
1. Tricolor LED displaying
2. 126 channels automatically jumping frequency, high anti-jamming
ability to ensure working reliability.
3. 7 groups ID code settable, user can use 7 groups individual
wireless system without any interference with each other in the
4. Input voltage: 5VDC 500mA MIN
5. Communication distance: 500M
6. Work frequency section: 2.4GHz ISM band, 126 channels frequency
7. Max transmitting power rate: 23dBm
8. Receiver sensitive: -94dBm
9. Signal port:3 pin male plug (for transmitter) & female plug
ID code and LED color corresponding correlation:
3: RED+GREED = YELLOW
5: RED+BLUE = PURPLE
6: GREEN+BLUE = CYAN
7: RED+GREED+BLUE = WHITE
Press key 1 time to indicate ID setting, press again to set ID,
then ID value adding 1 each time by press.
LED constant lit up: no DMX or wireless signal
Red LED flash: transmitting
Green LED flash: Receiving
RF frequency------2. 400-2. 525G, total 126 channels, it is
ID Code------17 groups ID code, press "Key" for setting, it only
can works under same ID code of transmitter and receiver.
1. Power on DMX512 wireless received board and transmitted board.
2. Press "Key" button to set same ID value of transmitted board and
received board, please use different
ID value if you need to use more than 1 group wireless system at
the same time in the same place.
3. The red LED flashes when transmitter transmits DMX data by no
interfered frequency section, then
receiver changes communicated frequency section. Green LED flash
till received corrected same ID value,
LED flash more fast once DMX data more fast.