Home > Products > Pick And Place Machine > High speed Pick
& Place Vision for Pick And Place Machine TVM802A
Product nameHigh speed Pick & Place Vision for Pick And Place Machine
DetailsHigh speed Pick & Place Vision for Pick And Place Machine
The boundary dimension of this equipment is 950*700*300mm It mainly
consists of a work head,
top and bottom visual systems, a work table, feeding racks, etc.The
moving range of X and Y axes
is 395*445mm, while the moving range of Z axes is 15mm.,PCB of size
330*340mm at most,
available for jointed board operation.
Why choose our machine:
1) The customer who operates on a small-to-medium
Scale will tend to opt for such a small desktop automatic pick and
place system which is very convenient and easy use even without a
2) If the number of boards does not exceed a few hundred per
working day, such a small desktop placement may well be the best
3) Consider about the cost efficiency, the small desktop placement
reaches its maximum cost efficiency in the middle range of
Volume, particularly where full-time working is not always
4) A further factor which affects the choice of system is the
product mix:If the boards are all customer-specific boards, each
with a short or unpredictable length of run, and if production must
be flexible and capable of coping with frequent changes, such small
desktop placement may be best.
5) Avoid human error, more accurate and faster.
1) Are the menus in English?
A:The machine have both Chinese and English version, user could
switch the language depends on your needs.
2) Are there the Program in English?
3) Does it have a vision system?
A:Sure,it has the vision system,it means the Up and Down Vision
4) How do I tell which head to use?Does there any guide for nozzle?
A:There're totally 5 types of noozle:XS, S, M, L,XL
M:LED(5050),SOP-8,SOP-14,SOP-16,SOT-223,SOT-252(IC size less than
L:IC size more than 10*10mm, need to setup the height of component.
XL:Apply for the TQFP64,SSOP28,etc
5) Some customer will ask us the Min and Max IC our machine can
The Min IC is 0402,the Max is 20*20mm ,PIN foot less than 100,
fine-pitch above 0.5mm, the height of component no more than 5mm.