OK-IIL Opti-Klens II LAB Face/Eyewash Fountain, Chrome-plated, solid brass face & eyewash unit is designed to
fit laboratory gooseneck faucets as a permanent face wash &
eyewash fountain with unlimited water supply in an emergency. In
operation, unit mounts to the spout with two spray nozzles curving
upwards with a 15 degree greater angle then the standard OK-II
model. In an emergency, it frees both hands to hold eyes open to
the flow of water. Delivering more than 3 gallons of water per
minute, it does so at a reasonable height. No plumbing required.
Two of the most common adapters are packed with the unit. Other
adapters are available from manufacturer. Meets ANSI Standard
#Z358.1-1998 for an eyewash unit. The addition of the Eliminator
Valve allows water temperature to be pre-set at the faucet and
remain on. You now have a dedicated face wash & eyewash station
with only cold water available. For sink use, the water flow is
activated by the use of the push through plunger on the Eliminator
Valve. Push the plunger to the opposite side for water flow.