1600mm 20T Automatic Slitting Machine for steel coils Slitter line
1) Thickenss: 1mm-5mm
2) Width: 550mm-1550mm
3) Capacity: 20T
4) Speed: 0-40m/min
5) Maximum slitting slices: 30 pieces
6) Composed device: uncoiler , slitter, recoiler
|Application:||CR/HRC/galvanized and so on|
|thickness of coil plate:||1-5mm|
|width of coil plate:||1550mm|
|the diameter of slitting blade shaft||Ф240mm|
|material of slitting blade:||9CrSi|
|the hardness of slitting blade:||HRC58°-60°|
|tolerance of width error:||≤±0.05mm/2M|
|area of the whole machine:||30m(L)x6m(W)|
|Production orientation||from left to right|
1. Hydraulic entry coil car
◆The car can move levelly and vertically, which is convenient for
putting the steel coils into the de-coiler.
2. Hydraulic de-coiler
◆Supporting the coils and doing uncoiling.
3. Press and straightening machine
◆ It is good for improve the plates' surface and do straightening
then guiding the steel plates into next process.
4. Hydraulic cutting machine
◆it is used to make the plates easy to the next process by cutting
the head even and also used to make the big coils divide into
several small coils.
5. Transition table1
6. Side guide device
◆It uses the vertical rollers of both sides to guide the plates
into the slitting machine correctly.
7. Slitting machine
8. Scrap winder
◆It is used to pack and wind the slitting scrap strips.
9. Transition table
10. Pre-dividing tension device
11. Hydraulic recoiler
◆It adopts the hydraulic expand and shrink recoiler shaft to tight
the inner hole of coils
◆It uses the hydraulic movable arm with the supporting spacers to
ensure the even recoiling quality.
◆It is equipped with the push device to help unload the coils
Delivery and shipment
1. The whole line needs 3 containers , one 40 OT container and two
2. From the day we receive the down payment, after 80 days can be
finished the production.
3. All the stuffs will be fixed with the containers one by one to
provent the damage happen during the journey
4. For the spare parts and the small stuffs, they will be packed in
the wooden box or the iron box .
ZJX-1-6X1600mm hydraulic slitting line is used for slitting the
CR/HRC/stainless steel /galvanized to prepare for the next process.
+Strong anti-risk capability
+Abiding by the contract,keeping promise
+Competitive Price:best price with good quality
+Professional Teamwork:we are all professional and we will design
Welcome to visit our company!