Volvo Truck Diagnostic Tool Volvo VCADS Pro 2.40 Version
VOLVO VCADS Function:
Diagnostic Program designed to read and clear fault codes.
Reprogram ECM parameters and ECMS
All features unlocked for the following manufacturers
 Volvo Truck Corporation
 Volvo Bus Corporation
 Volvo Penta
 Volvo Construction Equipment
PTT is a Windows-based diagnostic application specially designed to
test, calibrate and program engine parameters. This software
supports VN, VT, VHD, WG, WX and AC from model year '98 forward.
Tests for fault tracing of Volvo D7C, D11F, D12B, D12C, D12D, D13F,
D16D and D16F engines are incorporated into PTT.
Many funtions in today's modern vehicles are controlled by
electronic control units(ESUs). ECUs control components such as the
engine, instrumentation and certain vehicles funtions. PTT is a
toolbox that bundles diagnostic (VCADS) and repair applications
(Guided Diagnostics) together making it a one stop shop for the
technicians. The main purpose of PTT is to support the diagnostic
& repair process and to make it easier for technicians to work
with the tools provided. PTT provides access to vehicle and
parameter programming, service information and diagnostics
VCADS Elite is a windows - Base software tool developed to test,
calibrate and program parameters on Volvo ECUs.
VCADS elite software is installed on a PC. The PC is connected to
the communication connector in the vehicle via the communication
interface(Volvo part number 9998555).
VCADS Elite provides tests and calibrations for VOLVO vehicles that
are equipped with the Vehicle Electronics '98(VECTRO II) or Version
2 electronic control systtems. The application consists of a number
of standrd graphical interfaces, such as graphs and continuous
displays of parameters values. The operations are organized in the
menu according to function groups. Some ECUs have changeable
parameters that can be use to adjust or customize certain
functions. Volvo ECUs often have two types of parameters: Customer
parameters and Vehicle paameters.
Customers parameters can be programmed locally using VCADS Elite.
Vehicle parameters genarally are used to configure the vehicle when
it is built and alteration of these parameters requires a
connection to VDA(Vehicle Data Administration) at Volvo . These
parameters CANNOT be read or programmedwith VCADS Elite. These
changes must be performance by a Volvo Truck dealer.
VOLVO VCADS Adjustments and improvements
- Support for new language: Thai
- Support for new models: FL and FE
- The Option dialog in the Tool menu has been updated.
- Manually entered chassis series are validated on the local
- Possibility to correct parameter values that are incorrect
according to specifications. Parameters with values that are not
valid are marked with red color. Previously, this situation caused
an error that interfered with parameter programming.
- Help desk tool is updated. The actions 1 - Update phone book and
3 - Change connection type are found under 1 - Central
- Campaigns which have been downloaded in intermediate storage mode
but are not reported will, after 30 days, be reported as not
performed for safety reasons.
- If the hardware part number in the control unit differs from the
hardware part number stored in the central systems, VCADS Pro will
automatically check if there is an appropriate conversion kit
available. If this is the case, a dialog box appears asking the
user to run the conversion kit.
- New procedure for downloading of new versions of VCADS Pro.
- If there is unused or unreported software stored in Intermediate
Storage, the user will be notified and have the possibility to view
more detailed information.
- Help text updated with instructions for parameter programming by
templates, the new Option dialog and information about new
functionality in intermediate storage.
- Campaign handling will from now be reported after programming is
finished and not at the next authenticated connection to central
- The operation conversion kit has been split into two operations:
Conversion kit and Accessory kit.
- Oscilloscope related operations for special tool 88890040 have
updated oscilloscope software.
- New version of Perf: performance application. Version number:
The following operations have been added or updated in VCADS Pro:
- 17012-3, 1700-21-03-02 Fault codes
- 17054-3, 1700-22-03-06 Accessory kit
- 20006-3, 2000-08-03-06 20006-3 Engine data statistics
- 2374-08-03-02, 23712-3 Injectors shut off, manual
- Support for Dennis Eagle (DE)
VOLVO VCADS Languages:
English, Hungarian, Dutch, Danish, Spanish, Italian, Chinese,
German, Dutch, Norwegian, Polish, Russian, Turkish, French, Czech,
With Volvo VCADS Pro 2.40.00 you can do:
VOLVO TRUCKS: AC, FM10, NH565, FH12, FM12, VHD, FH16, FM7, VN, WC,
WG, WI, FH565, NH12, FL6,FL7, FL10, FL12, NH525,
WX, COMP04, FE, VHD, FH, FM, VM, FM9, F10, F12 , F16, NL10, NL12
VOLVO BUSES: B10B, B10M, B10L, B10R, M10R, B12, B58, B6, B7R,
RENAULT TRUCKS (with DXi engines): CESAR, KERAX, KERAXMIL, MAGNUM,
MIDLUM, PREMIUM, SH 23, SH 510
VOLVO CONSTRUCTION EQUIPMENT (CE):
Wheel loader: L110E, L110F, L120E, L120F, L150E, L150F, L180E,
L180F, L220E, L220F, L330E, L350F, L60E, L60F,
L70E, L70F, L90E, L90F
Articulated Hauler: A25D, A25E, A30D, A30E, A35D, A35E, A40D, A40E,
Excavator: EC135B, EC140B, EC140C, EC160B, EC160C, EC180B, EC180C,
EC210B, EC210C, EC235C, EC240B,
EC240C, EC290B, EC290C, EC330B, EC330C, EC360B, EC360C, EC460B,
EC460C, EC700C, EC700B, EC700C,
ECR145C, ECR235C, ECR305C, EW140B, EW140C, EW145B, EW145C, EW160B,
EW160C, EW180B, EW180C,
EW200B, EW210C, FC2121C, FC2421C, FC2924C, FC3329C, PL4611
Grader: G710B, G720B, G726B, G730B, G740B, G746B, G780B, G930,
G940, G946, G960 ,G970, G976, G990
Compact Excavator: ECR88
VOLVO VCADS Package List:
1,9998555 Adapter *1
2,8Pin Cable for Volvo Truck *1
3,16Pin Cable for Volvo Construction*1
4, RS232 Cable *1
6, Volvo VCADS(PTT 1.12) Software 2.40 Version Disc *1