Multiple Production Lines Comflor 210 Alternative Composite Floor
Deck Galvanized Steel Composite Slab
ComFlor 210 has very effective cross stiffener technology and the
deep profile shape provides a very efficient metal deck and
composite slab, with a low usage of concrete. Slimflor systems have
wider lower flange steel beams that allow the deck to land on the
Efficient - low use of steel and concrete.
Versatile – top or bottom flange application.
Nestable profile gives low transport and handling costs.
|Name||steel decking formwork|
|Base material||Hot Dipped Galvanized Steel Sheet|
|Yield strength||Q235 or Q345 Refer to Standards GB/T1591-2008|
|Thicknes||0.8 -1.5mm(normal 0.8,1.0,1.2)|
|Less than 5.8m load in 20GP|
|5.8m-11.8m load in 40GP|
|Packing||Bundle ,water-proof package with steel belt|
20 days after confirmation
Following are some of typical profiles available in market:
- Closed type galvanized steel floor decking
|(2) Opened type galvanized steel floor decking||YX75-230-690|
|(3) swallow tail galvanized steel floor decking||YX51-200-600|
The FAMOUS steel base product has a Z350 zinc-coating mass. It was
selected to provide superior corrosion protection in service,
directly as a result of increased coating mass. FAMOUS steel is
also available with a Z450 coating mass with a 15 year warranty.
Comprehensive shear stud welding tests across a range of base
thickness with both coating masses were undertaken to ensure
consistent results can be achieved on site.
Steel and concrete composite slabs are lighter and stronger than
most conventional slabs. The steel decking provides tensile
reinforcement, combining with the compressive strength of the
concrete for an all round stronger slab. Steel decking profiles are
designed to prevent any longitudinal slip between the steel and
concrete in the slab itself, and any transverse movement between
the slab and supporting beams.
The weight savings achieved in composite slabs can be passed on to
other areas of the design, such as foundations. And because steel
decking acts as permanent formwork, it can significantly reduce the
need for propping or temporary formwork -saving both time and
Easy On-Site Handling
Steel decking is delivered to site in pre-cut lengths, and in
pre-packaged bundles. The bundles can be easily craned into work
areas, and the individual sheets quickly layed by hand. One truck
can carry 1,000 sq metres of decking at a time, and a team can
install up to 400 sq metres in a day.
Speedy, Safe Construction
A composite slab effectively acts as a safe working platform. Once
the slab is poured, following trades can get on with their jobs
below almost immediately. At the same time, work can continue
unhindered on the floors above, allowing simple installation of
services. Cable trays, ductwork and service pipes can be suspended
neatly underneath the slab with purpose designed clips, brackets
and hangers that locate easily and quickly into recesses in the
steel decking profile.
To complete our floor decking products we advise a complete floor
slab construction by adding the supply and laying of reinforced
concrete. This single point solution allows a fully integrated
metal deck and concrete slab with associated trade interface and
Composite slab which is comprised of lightly reinforced concrete
cast on profiled steel decking are an option whether the beams are
downstand or integrated within the slab depth for a shallow floor
form of construction. The slabs are normally reinforced using an
upper layer of mesh and, sometimes additional bars in the troughs
(usually for longer periods of fire resistance and heavy loads).
Fiber reinforcement may also be used. Spans of up to 4.5 m can be
achieved using trapezoidal decking. Some so-called deep decking
profiles also exist (over 200 mm deep), that can span 6 m or so
without propping during construction.
While FASEC Rebar-truss triangle welded metal decking system adapts rapid construction requirements of the main steel structure
and provide fast work procedures. It can save a lot of construction time compared to traditional
floor decking system. It can also improve the rigidity of the floor
and save the amount of steel and concrete, so as to reduce the
The Surface embossed increase the bonding of floor deck and
concrete, make the floor deck system has high-strength bearing
capacity. It is totally fire-proof and can span long without middle
So from cost saving and time saving view, the FASEC rebar-truss
triangle welded metal decking system is better choice. However, in
much of ready design, the deck is already designed and in avoiding
of redesign, recalculation and re-submit/approval, we can also
offer various customized steel floor deck profiles to cater for
various contractors’ need, meanwhile we will offer various
technical support in the aspects of load span and stress analysis
Following are some typical detail:
Warmly welcome various clients from International market to enquiry
and visit us!