Structure of FPC
According to the number of layers of conductive copper foil, FPC
can be divided into single layer circuit, double layer circuit,
multi-layer circuit, double sided and so on.
Single-layer structure: the flexible circuit of this structure is
the simplest structure of the flexible PCB. Usually the base
material (dielectric substrates) + transparent rubber(adhesive) +
copper foil is a set of purchased raw materials(semi-manufactures),
the protective film and transparent glue are another kind of bought
raw material. First, copper foil must be etched to obtain the
required circuit, and the protective film should be drilled to
reveal the corresponding pad. After cleaning, the two are combined
by rolling. Then the exposed part of the pad electroplated gold or
tin to protect. In this way, the big panel board will be ready.
Generally also it’s stamped into the corresponding shape of the
small circuit board. There is also no protective film directly on
the copper foil, but printed resistance soldering coating, so that
the cost will be lower, but the mechanical strength of the circuit
board will become worse. Unless the strength requirement is not
high and the price needs to be as low as possible, it is best to
apply the protective film method.
Double layer structure: when the circuit is too complex to be
wired, or copper foil is needed to shield the ground, it is
necessary to choose a double layer or even a multilayer. The most
typical difference between a multilayer and a single plate is the
addition of a perforated structure to connect the layers of copper
foil. The first process of transparent rubber + base material +
copper foil is to make holes. Drill holes in the base material and
copper foil first, clean and then plated with a certain thickness
of copper. The subsequent fabrication process is almost the same as
the single-layer circuit.
Double sided structure: both sides of the double sided FPC have
pads, mainly used to connect other circuit boards. Although it and
monolayer structure is similar, but the manufacturing process is
very different. Its raw material is copper foil, protective film
and transparent glue. The protective film should be drilled
according to the position of the pad first, then the copper foil
should be affixed, the pad and track lines should be etched and
then the protective film of another drilled hole should be affixed.
FPC Case: Flex-Rigid PCBs of Prototype PCB Built On Polyimide + FR4
(FPC’s are custom-made products, the picture and parameters shown
are just for reference)
General description
This is a type of rigid-flex PCB for the application of Telemetry
System. It’s a 3 layer of rigid flex PCB. The base laminate is from
ITEQ, It’s fabricated per IPC 6012 Class 2 using supplied Gerber
data.
Parameter and data sheet
Size of Flexible PCB | 20.23 X 80.91mm |
Number of Layers | 3 |
Board Type | Rigid flex PCB |
Board Thickness | 1.0mm |
Board Material | 1.0mm FR-4 / 0.15mm Polyimide |
Board Material Supplier | ITEQ |
Tg Value of Board Material | 60℃ |
|
PTH Cu thickness | ≥20 µm |
Inner Iayer Cu thicknes | 35 µm |
Surface Cu thickness | 35 µm |
| |
Coverlay Colour | Yellow coverlay / Green solder mask |
Number of Coverlay | 2 |
Thickness of Coverlay | 25 µm |
Stiffener Material | no |
Stiffener Thickness | N/A |
| |
Type of Silkscreen Ink | IJR-4000 MW300 |
Supplier of Silkscreen | TAIYO |
Color of Silkscreen | White |
Number of Silkscreen | 2 |
|
Peeling test of Coverlay | No peelable |
Legend Adhesion | 3M 90℃ No peeling after Min. 3 times test |
|
Surface Finish | Immersion Gold |
Thickness of Nickle/Gold | Au: 0.03µm(Min.); Ni 2-4µm |
RoHS Required | Yes |
Famability | 94-V0 |
|
Thermal Shock Test | Pass, -25℃±125℃, 1000 cycles. |
Thermal Stress | Pass, 300±5℃,10 seconds, 3 cycles. No delamination, no blistering. |
Function | 100% Pass electrical test |
Workmanship | Compliance with IPC-A-600H & IPC-6013C Class 2 |
Features and benefits
Excellent flexibility
Reducing the volume
Weight reduction
Consistency of assembly
Increased reliability
Controllability of electrical parameter design
The end can be whole soldered
Material optionality
Low cost
Continuity of processing
Small quantity order is accepted
DDU Door to door shipment with competitive shipping cost.
Application
LCD module, mobile phone module flex board, Consumer electrostatic
Bracelet soft board
Why choose us?
1) Focus on your core competencies: We’ve deeply known it is full
of fierce competition for our customers in the market. You can
focus on such important competencies as research and development,
sales and marketing based on our professional performance and
skilled services that exceeding your expectation.
2) Cutting-edge technology: it is rational for a small and
medium-sized customer to hanker after the latest equipment and
manufacturing expertise for its PCBs. By the partnerships
with Bicheng PCB, you gain access to reach your expectation with
our 3 factory bases with over 26,000 square meters.
4) Save the cost of production: Production cost is one of the key
points of our customers’ product competitiveness. Bicheng PCB have
been striving to reduce its manufacturing cost from equipment
introduce, worker training and technology improvement to increase
their profitability. Customers are satisfied with our cost savings
but without quality loss.
5) Avoid hassle: It’s an upset matter when quality problem hassling
you. Bicheng engineering design prevents problem from occurring in
pre-production. You will not get headache with Bicheng prototypes,
small orders and volume production. Our rate of customer complaint
is less than 1% and will be solved satisfactory.
6) Save time: Market requires the products updating quickly.
Bicheng PCB always works fast and flexible to save the time of
production from prototype to standard production,
quick turn-around or scheduled deliveries.
7) An excellent team: Bicheng is trustworthy partner with passion,
discipline, responsibility and honesty. We have a team of
experienced sales persons and skilled customer services. Do not
change your supplier. If change is must, Bicheng is the right one
for you.