Natural/argon gas vortex flow meter with bluff body
Vortex flowmeter is designed for measuring the volume/mass flow of
liquids, gases and steam based on Karman vortex principle. Adopting
advanced differential algorithm along with measurement of
isolation, shielding and wave filtering, vortex flow meters have
the advantages of immunity on vibration and noise. Meanwhile, the
liabilities of LUGB series vortex flow meters are well guaranteed
by unique sensor packaging technology. Upon receipt, examine your
meter for visible damage. The Vortex is a precision measuring
instrument and should be handled carefully. Remove the protective
plugs and caps for a thorough inspection. If any items are damaged
or missing, contact us. Make sure the Vortex flow model meets your
1.High accuracy and good repeatability
2.The detection element has no contact with the fluid, and has
stable performance and high reliability.
3.The structure is simple and firm, movable parts, and reliable in
4.The measuring range is wide that can up to 1:10 (special up to
5.The pressure loss is small, about 1/4~1/2 of the orifice
Scope of application
It is widely used in large, medium and small types of pipeline
drainage, industrial circulation, sewage treatment, oil and
chemical reagents, and the measurement of compressed air,
saturated, overheated steam, natural gas and other medium flow.
flange type flange clamping type
DN15~DN300(Pipe type,Gripping type)
-40℃~80℃,Middle temperature:-40℃~250℃,High temperature:-40℃~350℃
|(8)Signal output||Pulse+4-20mADC, RS485, HART|
12V,24VDC(Three line pulse output)
24VDC(Two wire power supply)
3.6V lithium 7.5AH battery,2years lifetime(on the spot display)
Cast aluminum shell,Stainless steel shell(Customizable)
(12)Protection grade IP65
(13) Explosion-proof grade EX II BT4Gb, EXI II aBT4Ga
Measurabe Flow Rate Range
Note: the flow range a below is foe reference only. Consult us if
you have special requirement.
Refer to the nameplate or certificate for actual flow rang
Cautions for installation
Rquired Lengths of Straight Run
The recommended guidelines are given to enhance accuracy and
maximize performance. Distance given here are minimum requirements;
double them for desire straight pipe lengths.
• Upstream: allow a minimum straight pipe length at least 10 times
the internal diameter of the pipe.
For example, with the 50mm pipe ,there should be 500mm of straight
pipe immediately upstream.
Desired upstream straight pipe length is 500mm.
• Downstream:allow a minimum straight pipe length at least 5 times
teh internal diameter of the pipe. For example, with the 50mm pipe
, there should be 250mm of straight pipe immediately upstream.
Desired upstream straight pipe is 500mm.
Sichuan VACORDA Instruments Manufacturing Co., Ltd. is a
professional production-manufacturing enterprise specialized in
designing, producing and marketing of instruments and apparatuses.
Our company has been established for 21 years since 1997 to grow up
to be a team of high-quality, united, hard-working and
truth-seeking characters. Solid foundation has been established.