2017 New KAVO Spindle PCB Separator Router Machine with 60000rpm
1.X10 zoom-in image makes programming easier&increase the
accuracy of point setting.
2.Two sliding table provides simultaneously in-and-out movement to
reduce the tack time for better productivity.
3.AUTO MARK offset system.CCD image could check&simulate the
path or routing to reduce unnecessary mistake before cutting.
4. Has routing bit life time checking and alarm system to remind
operator to change routing bits when it finish 120M cutting. And
routing bit first 2mm cut the first miling point, middle 2mm cut
the second milling point, the last 2mm cut the third milling point
to increase its life time.
5. CCD image could check&simulate the path or routing to reduce
unnecessary mistake before cutting.
1. Using double slide into place device, reduce the cutting waiting
times, increase production capacity.
2. Avoid artificial flap caused by the cracking of tin and part
damage and other issues.
3. Avoid using blunt or fold, produced by mechanical stress.
4. Suitable for the finished plate arc and line cutting.
5. Suitable for small pieces of the final cutting, base plate of a
mobile phone, PDA, PC interface card and so on.
|Standard working area||320*320mm(standard)|
|Board Positioning||Dual workstation with nest fixture or pin fixture|
|Panel Location||Located by tooling holes or edges of PCB|
|Spindle motor||KAVO Spindle|
|Dust filtration system||3KW Vacuum Cleaner|
|Vision system||High resolution CCD video camera|
|Programming||Vision assisted point to point manual teaching|
|Editing Function||Dry run vision assisted / test run mode|