Damisol @ 3042-700
very stable high reactive resin _
H level _
the excellent mechanical properties, durable _
high flexibility _
passed UL certification (certificate number: E98511) _
An overview of the
One-component high temperature resistant, light yellow transparent
unsaturated polyester resin, with Damidil 9117 as reaction diluent,
after thermal crosslinking with H
Persistent high temperature resistant properties of the level
UL H level, certification number: E98511.
This product is very stable product of only group share, can be
used for any continuous immersion process (dipping, rolling,
dripping leaching); In the us
Under the condition of suitable viscosity, can be used for VPI
Applicable to all kinds of coil, especially to high mechanical
strength of the motor and stator coil continuous immersion process
(dipping, rolling, drops
3042 product can be used for any automatic or manual of dipping,
rolled or dripping leaching process. Because it is low viscosity,
so that the production
In parts of fine point has good permeability, and don't even need
to parts preheated. According to the different types of motor
Resin viscosity parameters and. Series 3042, now has 120 mpas and
700 mpas viscosity of two kinds of specifications. The fine for
Wires can be used 9117 diluted resin to low viscosity. High
viscosity specifications according to customer's requirement.
Crosslinking process: at least 150 oc 30 to 45 minutes.
High temperature and long time to achieve high mechanical and
Resin should be to avoid impurity contamination and placed in the
< 25 oc environment.
Test the viscosity changes on a regular basis.
20 kg keg
200 kg a barrel
One-component 3042 products, store in airtight container, valid for
up to 6 months (oc) or 12 months (15 oc).
Such as large storage tank inside, it is suggested that kept under
standard atmospheric pressure dry air inside; At the same time, it
is recommended that the tank is not put in full, the most
As many as 70% of capacity.
Mixing resin from time to time, can make the oxygen permeation into
the resin, thus improve the validity.
Health and safety
Avoid contact with skin and eyes.
Operating in a ventilation environment and far away from the fire.
Wear safety gloves and eye operation.
Please complete information query on the MSDS.
Physical properties of unit data reference standard
Shore hardness D 88 ISO 868
Flash point oC or 32
Viscosity, Brookfield, 23 oc) mPas 700 + 100
Gel time (120 oc) mn 4 ~ 7
VOC % 17 ISO 60455-3 or less
Mechanical properties of
Bond strength (23 oc) daN 35 IEC 1033
Bond strength (130 oc) daN 20 IEC 1033
Bond strength (155 oc) daN 18 IEC 1033
Bond strength (180 oc) daN 8 IEC 1033
Water imbibition (23 oc, 7 days) % 0.23 ISO 62 or less
Chemical resistance (2% NaOH) % - 0.14 - ISO 175
Dielectric strength (50% r.h., 23 oc) kV/mm DIN 46448 110 / VDE
46448 or higher