Anti - Oxidation PPGI Steel Coil HDP Type ZN 40 - 275g / AZ 30g -
Painted Steel Coil for writing
Blue write broad use for chalk writing; no reflect light no chalk
ash flying.White write broad use for oil pen writing.Other
applications are like: 1. Construction:(Outside) workshop,
agricultural warehouse, residential precast unit, corrugated roof,
wall, rainwater drainage pipe, terrace, retailer booth, roller
(Inside) door, doorcase, light steel roof structure, folding
screen, ceiling, elevator, stairway, vent gutter
2. Electrical appliance: refrigerator, washer, switch cabinet,
instrument cabinet, air conditioning, micro-wave oven, bread maker
3. Furniture: central heating slice, lampshade, chifforobe, desk,
bed, locker, bookshelf
4. Carrying trade: exterior decoration of auto and train,
clapboard, container, isolation lairage, isolation board
5. Others: garbage can, billboard, timekeeper, typewriter,
instrument panel, weight sensor, photographic equipment
How we make Painted steel coil?
1. We start with the base steel that is lightweight yet strong.
2. Next comes a protective zinc alloy coating applied to both sides
by a continuous hot-dip method
3. A conversion coating is chiemically applied to the zinc steel to
enhance corrosion resistance and ehcure bonding surface.
4. Next, a corrosion inhibitive high technology primer is applied
5. Finally, a specially formulated high performance exterior paint
finish is applied and oven-baked to the top or working side, giving
a natural low-gloss finish.
|Metal||Hot Dip Galvanized or Galvalume Steel Coil.|
|color||Green or White|
|Standard||ASTM A755, JIS G3312, EN 10169.|
|Layers of the coating|
2/2(2 layers of top coating/2 layers of bottom coating);
2/1(2 layers of the top coating, 1 layer of bottom coating);
|Thickness of the coating||25um-75um|
a. 30% prepayment and 70% against B/L copy.
b. L/C at sight (need check the bank information and account
Within 15-30 days after prepayment under normal conditions.
We will inform you when signing contract if delivery time delay
Each bare coil to be securely tied with two bands through the eye
of coil (or not) and one circumferential, the contact points of
these bands on the coil edge to be protect with edge protectors.
Coil then to be properly wrapped with water proof /resistant paper,
it then to be properly and completely metal wrapped. And each
packed coil to be properly wrapped with band, three-six such band
through the eye of coil at about equal distance, and two-four such
bands securely tied around belly of coil at about equal distance.
Other stock , please click here : latest stock information
PREPAINTED STEEL COIL.pdf
Contacts Mrs. Betty
Mobile/Viber/Whatsapp: +86 18012353378