Corrosion Proof Painted Steel Coil For Corrugated Sheet , Color
Coated Steel Coil
Painted Steel Coil
Painted steel coil usually use roll paint technique to apply
different color paint on the surface of galvanize steel or
galvalume steel. It has lots of color choice.Customers can choose
colors referring to Ral color. Ral 3005, Ral 5012, Ral 6022, Ral
9006 is the most popular color.
Our general painted steel coil is Zn 60g, 25um painted in top and 10um painted in back, it can
service for at least 20 years without fading (related to different
How to order?
1.1.1 We have some coils in stock, MOQ 1 coil
1.1.2 For customized products, please inform me:
Usually we can produce according to RAL color card or sample
Other special grain:simulated Wood grain ,Stone grain and Embossed
We can make from 0.14 mm to 1.6mm as your requirement
We can make from 600 mm to 1250 mm, and common width are 1000mm,
1219mm and 1250mm.
d. paint thickness
Usually we can make 25um in top and 10um in back
e. weight of Zn coating
We can provide 40g-275g per square meter, most customers demand
f. with film or not
Without film is the most selection
Hot dipped galvanized steel DX51D+Z
Hot dipped galvalume steel DX51D+AZ
Layers of the coating
2/2(2 layers of top coating/2 layers of bottom coating);
2/1(2 layers of the top coating, 1 layer of bottom coating);
According to customers’ request
ZN40g-ZN275g or AZ30g-AZ180g
PE, HDP, SMP, HPC, PVDF
Overlay film (optional)
1. good durability, and can be used longer than galvanized steel
2. good heat resistance, and compared with galvanized steel,under
high temperature it does not discolor easily
3. good heat reflecting,good weldability, good adhesion
4. machining capability and spraying performance similar to
5. protective film can be provided according to customers’
a. 30% prepayment and 70% against B/L copy.
b. L/C at sight (need check the bank information and account
Within 15-30 days after prepayment under normal conditions.
We will inform you when signing contract if delivery time delay
Each bare coil to be securely tied with two bands through the eye
of coil (or not) and one circumferential, the contact points of
these bands on the coil edge to be protect with edge protectors.
Coil then to be properly wrapped with water proof /resistant paper,
it then to be properly and completely metal wrapped. And each
packed coil to be properly wrapped with band, three-six such band
through the eye of coil at about equal distance, and two-four such
bands securely tied around belly of coil at about equal distance.
Mobile/Viber/Whatsapp: +86 18012353378