260Mpa - 320Mpa Prepainted Galvalume Steel Coil Overlay Film PPGL
Painted Steel Coil
Painted steel coi is based on galvanize steel or galvalume steel
(PPGI and PPGL). It usually use roll paint technique to apply
different color paint on the surface. Customers can choose colors
referring to Ral color. We have some Sub-quality Prepainted Steel Coil in stock .It has
little defect on coil surface but no matter in use. When slitting
the prepainted steel coil, the defects is usually cut off.
Details as following.
Hot dipped galvanized steel DX51D+Z
Hot dipped galvalume steel DX51D+AZ
Layers of the coating
2/2(2 layers of top coating/2 layers of bottom coating);
2/1(2 layers of the top coating, 1 layer of bottom coating);
According to customers’ request
ZN40g-ZN275g or AZ30g-AZ180g
PE, HDP, SMP, HPC, PVDF
Overlay film (optional)
Structure of decorative galvanized steel sheet :
*Topcoat (finishing) which provides color, pleasing appearance and
appearance and a barrier film to enhance long-term durability.
*Primer coat to prevent undercutting of paint and enhance corrosion
*Pretreatment layer applied for good adhesion and to enhance
*Zinc coating for added corrosion resistance.
*Base steel sheet.
How to order?
1.1.1 We have some coils in stock, MOQ 1 coil
1.1.2 For customized products, please inform me:
Usually we can produce according to RAL color card or sample
Other special grain:simulated Wood grain ,Stone grain and Embossed
We can make from 0.14 mm to 1.6mm as your requirement
We can make from 600 mm to 1250 mm, and common width are 1000mm,
1219mm and 1250mm.
d. paint thickness
Usually we can make 25um in top and 10um in back
e. weight of Zn coating
We can provide 40g-275g per square meter, most customers demand
f. with film or not
Without film is the most selection
a. 30% prepayment and 70% against B/L copy.
b. L/C at sight (need check the bank information and account
Within 15-30 days after prepayment under normal conditions.
We will inform you when signing contract if delivery time delay
Each bare coil to be securely tied with two bands through the eye
of coil (or not) and one circumferential, the contact points of
these bands on the coil edge to be protect with edge protectors.
Coil then to be properly wrapped with water proof /resistant paper,
it then to be properly and completely metal wrapped. And each
packed coil to be properly wrapped with band, three-six such band
through the eye of coil at about equal distance, and two-four such
bands securely tied around belly of coil at about equal distance.
Contacts Mrs. Betty
Mobile/Viber/Whatsapp: +86 18012353378