13.56MHz PET Layer RFID Wet Inlay Tag HF Antenna Sticker Label MF
RFID inlays are composed of an IC (Integrated Circuit, Chip) and a
Dipole antenna. Wet inlays are inlays that have an adhesive backing
with a clear or colored topsurface of PVC,PET or paper, the PVC or
PET wet inlays are commonly used to make "RFID Labels" where the
inlay is placed on the back of the label with the adhesive side
away from the label side so that the label has continuous adhesive.
Placement of the wet inlay on the label is very specific to each
RFID printer in order to be programmed correctly by the printer and
also to minimize the risk of damaging the RFID inlay while in the
Antennas can be made of silver, aluminum or copper, with each
material producing very specific read and write characteristics
because of the different chemical properties. While there are some
more exotic materials sometimes used for antennas they are
considerably more expensive to produce and very vertical
application specific. Generally a copper antenna is slightly more
expensive that aluminum or silver but is more conductive and
usually provides a longer distance read capability.
Just as there is a very wide variety of IC's for inlays, there is
also a very wide variety of antennas ranging from very small - Dot,
Button, Paperclips through DogBone, Hammer, Crab, Radar, Satillite,
Squiggle, Mini Squiggle, Torpedo, Xcaliber, Web and Frog sizes -
each inlay usually has a specific name to identify it.
Size and shape of the antenna determines the read and write
distance and speed characteristics.
Most inlays are designed for a specific application use - a single
inlay can not and will not work for multiple types of RFID
requirements. Inlays that work near or on metal do not work as well
on wood or plastic.
- Air Interface Protocol: ISO14443A
- Operating Frequency: Global 13.56MHz
- IC Type: MF S50
- Memory: 1K Byte
- EPC Memory Content: Not guaranteed unique
- Max Read Distance: > 0.1 m
- Applicable Surface Materials: Plastic, cardboard, glass
- Tag Form Factor: Wet inlay
- Tag Materials: PET
- Recommended Ribbon: Full Resin
- Attachment Method: Acryllic, water borne adhesive
- Dimensions: 56*18mm
- Weight: 1 g
- Operating Temperature: -40° to +85°C
|RFID Chip||MF 1K|
|Material||PET (substrate), Aluminum (antenna)|
|Reading Dist.||1~10cm (depending on the reader or antenna design)|
|Data Storage||10 years|
|Applications||Semi-finished product for RFID adhesive label, Access control,
Ticket, Logistics and Supply chain,etc.|
|Sample||Free samples available upon request|
|Package||100 pieces per roll, 20 rolls per box, 2000 pieces per box|
· High end product for global supply chain management, industrial
and logistic applications.
· Excellent performance even on difficult-to-tag materials.
· Optimum size product for 18 milimeter wide converted labels.
· Possibility for different memory options: user memory 1K byte
· Serialized TID.
|Details of PET Layer|
|PET Layer Size||56*18mm|
If you are interested in this sticker label, please welcome to send
us an inquiry!