Liquids and Intert Gases Push Fit Hand Valve Water Hose Connector
- Faster Inline hand valve connector connect tubes at both end.
- Polyformaldehyde plastic body.
- Suitable for water and food use.
- Handles pressures up to 145 psi (10 bar),bursting pressure is 435
psi(30 bar) an operating temperature range of -20 to +60 degrees C,
and a vacuum capability of 750 mm Hg Meets
- Can be mounted on a wall or adjacent surface using staples
- Full port flow for higher operating efficiency than standard port
- Inline valve for connecting two pipes going in the same direction
- Push-to-connect ends for tight seals
This Service valve are used in various applications, including
radiant heating system,drinks dispense, pure water applications,
reverse osmosis system, and water purification system, among
SPE service valves are ideally suited to provide a temporary shut-off
facility in a drinks dispense situation. The valve consists of a
ball mechanism operated by means of a screwdriver slot. Push in
connections make for a fast installation time, especially in
confined spaces. The valves can also be used for domestic hot and
cold water supplies but must only be used with liquids
When tighting threaded fittings,use care nor to over-torque the
fitting as this may damage the fitting and cause a leak or other