IC-502 General Metal cleaning agent
IC-502 general cleaning agent is new generation oil removal
cleaning agent which is used for steel, aluminum,, copper, zinc
alloy , and all metal products. IC-502 Cleaning agent is made by
bio-degradation surfactant, additives and corrosion inhibitor. It
is used for cleaning kinds of greasy, and has the advantage of non
corrosive workpieces, and short anti-rust function. It is also used
for wiping large equipment surface, with the characteristic of low
alkaline, no cosrrosion, using under normal temperature, simple
operation, saving energy, long service life.
This cleaning agent can be used for all metal surface treatment by
wiping or dipping .
2.1 Add water to tank up to 90% capacity ;
2.2 Slowly add 100KG IC-502 cleaning agent , stir while adding;
2.3 Add the remains water amount to 1 ton, and then stir evenly.
3. Treatment Parameters
10% water solution.
Dipping treatment :
Time: 5-15minutes (Determine time according to the situation of
4. Supplement and Adjustment ( by 1000L)
The concentration is changed in using process, determine pH value,
and make sure IC-502 cleaning agent concentration., keep it in
certain scope. Supply cleaning agent to make sure cleaning effect.
Workpiece stain is cleaned off, do other treatment after water
If workpieces need rust protection, dry it directly after cleaning
without water rinsing.
Wash cleaning tank and drain off the greasy sludge by one time
every 20-30 days .