CH-70 Hydraulic Puncher With 35T Force Max Punching 10mm Steel
1. CH60,CH-70 split-unit hydraulic hole digger is specilized for
cornor steel,flat steel,brass plate and other metal material hole
digging,especially for electrally and construction field etc.
2. match pump CFP-800-1,CP-700 and electric pump
Max thickness of sheet:10mm
Depth of throat:100mm
3. Pump operated, hydraulic hole punch driver tool, hole digger,
hole punching machine.
CH-60 hydraulic hole puncher machine, hydraulic hole punch tool.
Pump operated, hydraulic punch driver tool, hole digger, hole
Our factory standard settings:
Other sizes are accept accordly.
4. CH-60 is a remote control tool, works with an external hydraulic
pump (Hand Foot or Electric pump). It is designed to punch round
holes on Cu/Al Busbar. With 4 pairs standard punching dies (10.5 /
13.8 / 17 / 20.5mm), punching hole size is between diameter 10.5mm
and diameter 20.5mm. Busbar thickness should below or equivalent to
12mm. With hydraulic power, 4 pairs sharp punching dies, easy fast
and clean punching can be achieved.
1 Hydraulic hole puncher is designed for punching holes on Cu/AI
2 Punching the different kind metal sheet up to 10mm.
3 This type of hydraulic hole puncher can match up hand pump
CP-700/ CFP-800-1 or electric pump.
|model||output||aperture||confirgured dies||max.thickness||depth of throat||weight||packing size|
|CH-60||30T||3/8"-3/4"||11.1, 14.3, 17.5,20.6mm||iron steel-8mm; copper busbar-10mm||95mm||21kg||26*16*39|
|CH-70||35T||3/8"-3/4"||11.1, 14.3, 17.5,20.6mm||iron steel010mm; copper busbar-12mm||110mm||37kg||33*20*39|