Transformer Capacitance & Tan Delta Test Equipment Dielectric Loss & Capacitance

Transformer Capacitance & Tan Delta Tester , Automatic Tan Delta Tester , Dielectric Loss & Capacitance​

I. Products Description

Model FKGST Automatic 10KV Capacitance ＆Dissipation Factor Test Set is used to measure dissipation factor (PF) in heavy interference site such as power plants or power substations. It can also be used in laboratory for high accurate test. The meter is whole in one designed: including precision digital bridge, power unit, reference capacitor (CN), step-up transformer and other electronic circuits. It’s also using frequency shift technology, FFT (Fast Fourier Transform algorithm) and digital filtering. When started, it’s running automatically and then outputs the results on LCD display and prints the results automatically.

FKGST Tan Delta (dissipation factor) Tester consists of variable frequency power, tan delta bridge, testing transformer and standard capacitor inside the tester. Variable frequency power can produce five kinds of frequency: 45Hz, 50Hz, 55Hz, 60Hz and 65Hz under which test can be done. Variable frequency technique adopted in this tester can ensure high accuracy in high interference environment.

II. Test principle

Fig 1 Wiring Diagram of Main Power

RX1---Sampling resistance in ungrounded test specimen measurement

RX2---Sampling resistance in grounded test specimen measurement

CN---Standard capacitor

RN---Sampling resistance of reference signal

CVT---Voltage output terminal in CVT measurement by means of self-excitation.

III. Technical Parameters

1. Capacitance range: Internal HV: 3pF-60000pF/10kV; 60pF-1μF/0.5kV

2. Test accuracy: Cx: ±(reading×1%+1pF)

   tgδ: ±(reading×1%+0.00040)

3. External HV: 3pF-1.5μF/10kV; 60pF-30μF/0
4. Resolution: Maximum 0.001pF, 4 valid figures.
5. tgδ range:unlimited, 0.001% resolution, automatic identification for capacitance, inductance and resistance of three tested articles.
6. Test current range: 10μA-1A
7. Internal HV: Set voltage range: 0.5-10kV
8. Maximum output current: 200mA
9. Buck-bust method: continuous stepless regulation
10. Test frequency: 45, 50, 55 single frequency 45/55Hz automatic dual variable frequency
11. External HV: In case of UST, maximum test current is 1A, and power frequency or variable frequency is 40-70Hz
12. In case of GST, maximum test current is 10kV/1A, and power frequency or variable frequency is 40-70Hz
13. CVT self-exciting low voltage output: Output voltage 3-50V, output current 3-30A
14. Measuring duration: About 40s, depending on measuring method
15. Input power supply: 180V-270VAC, 50Hz/60Hz±1%, supplied by alternating current or generator
16. Computer interface: Standard RS232 interface
17. Printer: WH-A7 mini-type thermal printer
18. Environment temperature: -10℃-50℃
19. Relative humidity: <90%
20. Overall dimension:460×360×350mm
21. Weight:28kg

III. Configuration:

Founded in 2003, FANKE is the domestic leader specializing in designing and manufacturing HV test, measurement and overhaul equipments. In 2003, Wuhan HIGHVOLT Co.,Ltd is established as our subsidiary. We provide a diversity of complete testing solutions and one-stop service for electric power companies, electric research institutions and electric equipments manufacture companies.
Located in Guannan Science and Technology Industrial park-- the Optical Valley of China, we cover an area of 12,000 square meters used for workshop and offices.With the registered capital of 16,000,000 yuan, our annual sales volume reaches 70,000,000 yuan. As a sub-measurement unit of Wuhan city, we develop us as a comprehensive high-tech enterprise integrating research, development, production, installation, commission, sales and service consultancy.

Good networking keeps us stay advantageous and innovative in the market. Relied on the wide cooperation with institutions of higher learning in Wuhan, we establish a HV research center supported by professional HV engineers and specialists from Wuhan High Voltage Research Institute of State Grid, Institute of Water Conservancy and Hydroelectric Power of Huazhong University of Science &Technology and Wuhan University.

Our management team is composed of professional administrators with rich experience in modern business and project management and technical personnel specializing in HV, power transmission, transformation and automation. Until now, we employ 75 stable workers, 65% of whom have bachelor degree and some of the rest are advanced engineers and professional experts with Doctor degree.

We hold numerous intellectual property rights, utility model and invention patents for products, such as hydraulic integrated high voltage withstand test system, series resonant test trail, ultra high voltage AC/DC voltage withstand test equipment, power frequency PD free voltage withstand test equipment and other electric power maintenance equipments as well as other tailor-made products.
Our products have been applied for onsite handover, preventive maintenance and quality inspection test. We have customers all around the country, including stated-owned institutions and large-scaled enterprises in sections of railway, oil industry and chemical engineering. Some products have been exported to overseas markets, including USA, Mid-east, Korea, India and Vietnam, ect.

With a vision to win-win result, We will continue to focus on customer needs and rely on technical innovation, striving to become the top-ranking provider for electric testing and measurement equipments and EPC engineering service.