High Performance And Low Cost Water Soluble Flux PCBA In Line Cleaning Machine With CE Approved

Product Description

SME-6100 High Performance And Low Cost Water Soluble Flux PCBA In Line Cleaning Machine With CE Approved is specially used to clean water-soluble solder paste PCBA by using DI water with excellent wash performance.

DI water wash process: Pre-wash+Wash+ Rinse+Final rinse+ Air blow dry+ Hot air dry.

SHENHUA new developed spray cleaning technology, the system has following advantages:

1. Big quantity PCBA in line cleaning system.
2. Thoroughly clean water-sular solder paste flux on SMT or THT PCBA after welding.
3. DI water wash sections + DI water rinse section+ Air blow section + hot air dry sections.
4. Fresh DI water supply automatically, post-section DI water overflow to the previous-section to renew DI water.
5. Up/down spary system on wash and rinse sections.
6. DI water spray pressure can be adjusted for dirrerent PCBA cleaning requirements.
7. Standard equipped with Resistivity monitoring system, resistivity range 0~18 MΩ.
8. Air knives blow dry section+ hot air dry section.
9. SUS304 stainless PCB flat conveyor net system.
10. PLC control system, English operation interface, easy operation.
11.Many optional functions avalible.

12. Total SUS304 structure, Acid and Alkali corrosion resistance.

Machine Spec:

Customer Question & Answer

Q1: What kind of PCBAs can SME-6100 clean?

A1: Water-soluble solder paste PCBA.

Q2: Can SME-6100 clean PCBA very clean?

A2: Yes, normally we heat DI water to 60℃ and we have up and down 2x8 spray rods with diffirent type of spray nozzles.So it can clean very well, some of our customer are using SME-6100, they like it very much.

Q3: What is the DI water temperature?

A3: DI water can heat to 60℃.

Q4: What is the DI water consumption per hour?

A4: It depends temperature, normally 5~15L/ Hour.