| Sign In | Join Free | My disqueenfrance.com |
|
| Sign In | Join Free | My disqueenfrance.com |
|
| Categories | Current Transducers |
|---|---|
| MOQ: | 100 |
| Payment Terms: | T/T |
| Delivery Time: | 1-12 weeks |
| Packaging Details: | Original packing |
| Rated measuring current IPN (A): | 1000 |
| Measuring range IP (A): | 0～±2100 |
| Turns ratio: | 1:5000 |
| Power supply voltage VC (V): | DC±(15~24)×(1±5%)V |
| Rated measurement output ISN (mA): | 200mA |
| Secondary side current consumption IC (@±24V): | ≤35mA+ |
| Isolation withstand voltage: | 3.8kVrms/50Hz/1min |
| Basic error δi (@IPN，TA=25℃): | ≤±0.4% |
product manual
The magnetic balance Hall current sensor is suitable for accurate measurement of AC, DC and pulsating current isolation. The primary side and the secondary side are completely insulated during measurement.
| product advantages | Applications | Reference standard |
| High precision | AC inverter AC | EN50178 EN50155 |
| Good linearity | Battery powered | |
| Low temperature drift | Converter/Inverter | |
| Broadband | UPS/SVG | |
| Quick response |
| Main electrical parameters | |
| Rated measuring current IPN (A) | 1000 |
| Measuring range IP (A) | 0～±2100 |
| Turns ratio | 1:5000 |
| Power supply voltage VC (V) | DC ± (15 ~ 24) × (1 ± 5%) V |
| Rated measurement output ISN (mA) | 200mA |
| Measuring resistance RM (Ω) | |
70℃ 85℃ @ ± 15V, ± 1000A: 0Ω ~ 23Ω 0Ω ~ 19Ω @ ± 15V, ± 1300A: 0Ω ~ 7Ω @ ± 24V, ± 1000A: 0Ω ~ 63Ω 10Ω ~ 61Ω @ ± 24V, ± 2100A: 0Ω ~ 6Ω | |
| Secondary side current consumption IC (@±24V) | ≤35mA+ |
| Isolation withstand voltage | 3.8kVrms/50Hz/1min |
| Accuracy-dynamic parameters | |
| Basic error δi (@IPN,TA=25℃) | ≤±0.4% |
| Linearity δL (@IPN,TA=25℃) | ≤±0.1% |
| Zero output current IO (@IP=0, TA = 25℃) | ≤±0.4mA |
| Zero temperature drift IOT | ≤ ± 0.8mA (-40 ℃ ~ + 85) |
| Response time | ≤1µS |
| di/dt accuracy | ＞50A/us |
| Frequency bandwidth BW | DC..100kHz |
| General data | |
| Working temperature Ta | -40℃~+85℃ |
| Storage temperature Ts | -45℃~+90℃ |
| Relative tracking index | ＞175 |
| weight | ≤850g |
| Mechanical characteristics | |
| No tolerance | ±1 mm |
| Sensor installation method one (recommended) | 4 hole and 4 notch ø5.3mm 4 M5 steel screws |
| Sensor installation method two (recommended) | 2 hole and 2 notches ø 5.3mm 2 M5 steel screws |
| Recommended torque | 3.5 N·m |
| Busbar size (recommended) | 40.5×13mm |
| Secondary side electrical connection | 3 ×M4 screw |
| Remarks |
| 1. When the measured current direction is consistent with the
direction marked on the sensor, the sensor output ISN is positive. 2. The secondary side connection line of the product is preferably a shielded line. The shielding layer is close to the product end and the connection line can be connected to the case, and the negative power supply or power supply 0V. 3. The verticality requirements for the mounting screw holes of the power sensor: it is required to be level 8 or above (or below 0.06) in the national standard. 4. The flatness requirements for the installation surface of the power sensor: (a). The flatness of the large plane installation is national standard 11 or above (or the flatness is less than 0.25mm); (b). The flatness of the installation surface is designed with small round bosses It is required to reach the national standard level 12 or above (or the plane fluctuation is less than 0.5mm); 5. No tolerance ±1mm is noted; |
|
Low Zero Error 500A Current Monitoring Sensor For Battery
30kHz 1200A AC DC Pulse Current Measurement Sensor
4.75V 800A Current Transducers Response Time 2us
4.75V 5V 5.25V 1200A AC Current Sensor for accurate measurement
1200A Pulse Current Transducer Response Time 2us
40kHz 2us Response 700A AC Current Transducer
4.75 5 5.25V 2us Response 900A DC Current Transducer
900A Current Transducers For DC Current Measurement
1200A 5V Current Transducers For AC Current Accurate Measurement
2000/IP 15A Current Transducers For Pulse Current Isolation
