Oblique Tracking System Worm Slew Drive 800 Nm SE5 With 12V Gear Motor

SE 5 Inches Horizontal Slew Bearing Gearbox For Oblique Single Axis Tracking System

Horizontal Slew Bearing

For the core component adopts slew bearings, it can withstand axial force, radial force and tilting torque at the same time. The slew drive is easy to install, easy to maintain, and saves installation space to a greater extent. The product can be widely used in heavy-duty flat transport vehicles, container cranes, with car cranes, aerial vehicles, solar generator systems such as the day, such as construction machinery and new energy fields.

Advantages

1. Rotation 360 degrees

2. Connection of a driving motor from the left or right side

3. During installation, it is not necessary to adjust the gearing clearance; this is already set by the producer before factory

4. Simple installation and low maintenance

5. Rational space utilization

6. The gear is self-locking; therefore a brake is not necessary

7. Easy and fluent method of starting and stopping

Performance Parameters of SE series

Applications

Flat Single Axis Tracking Bracket

The flat single-axis tracking bracket refers to the bracket tracking the rotation of the sun around a horizontal axis. This horizontal axis can be in the north-south direction or the east-west direction. The power generation in the north-south direction is higher, so the axis of the flat single-axis tracking bracket is Generally north-south direction.

Oblique uniaxial tracking bracket

The inclined single-axis tracking bracket refers to a bracket that rotates and tracks the sun around a north-south inclined axis. In the middle and high latitudes, compared with the flat single-axis tracking system, the power generation of the inclined single-axis tracking system has been greatly improved. Of course, since the rotation axis is inclined, the cost of the inclined uniaxial tracking bracket is also higher than that of the flat uniaxial bracket.

Azimuth single axis tracking bracket

The azimuth single-axis tracking bracket can be regarded as a fixed bracket installed on a rotating base. When this bracket is tracking, the angle between the square array and the horizontal plane remains unchanged, but the azimuth angle of the square array changes.

Dual axis tracking bracket
The dual-axis tracking bracket can be regarded as a bracket whose inclination can be adjusted automatically mounted on a rotating base. The so-called dual axis means that the bracket can rotate along two independent axes. Generally, one axis allows the azimuth angle of the bracket to rotate freely, and the other axis allows the inclination angle of the bracket to freely rotate. In this way, the dual-axis tracking bracket can always remain perpendicular to the sun's rays, which is the highest power generation of all tracking brackets.

Changzhou Hangtuo Mechanical Co., Ltd is a high-tech enterprise integrated with research and development, production and sales. We focus on the research and development of slew bearings, high-precision slew drives, and planetary gear motors. We are committed to provide customers with reliable, diversified, high-quality and customized solutions.

Our products are widely used in solar photovoltaic, photothermal, satellite, robot, engineering machinery etc. We will always devote to continuous product improvement and the implementation of strict quality control standards, and will continue to strive to meet the growing needs of customers.