SHT75 Pin Type Temperature And Humidity Sensor Chip Soldered

SHT75 Pin Type Temperature And Humidity Sensor Chip

The sht7x can be soldered using standard wave soldering. 20 seconds at a maximum temperature of 235°C. If manual soldering is used, the contact time should not exceed 5
seconds, the maximum temperature is 350°C. Note: After wave soldering, store the sensor at >75%rh for at least 12 hours to ensure that the polymer
of rehydration. Failure to do so will result in drift in sensor readings. The sensor can also be placed in a natural environment (humidity>40%rh) for more than 5 days
to rehydrate. In either case, whether manual soldering or reflow soldering, it is not permissible to rinse the board after soldering.

Datasheet:

Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, photodiodes, Japan FIGARO, UK CITY, ALPHASENSE full range of semiconductors, catalytic, electrochemical gas sensors, French HUMIREL/MEAS humidity sensors and other international well-known companies authorized agents or distributors, to provide customers with product information, products Solutions, product selection, supply guarantee and logistics services, etc.