BP93420DII Differential Pressure TransmitterIntroduction of differential pressure transmitter:BP93420DII differential pressure transmitter uses a piezoresistive
diffused silicon sensor. When the measured medium's differential
pressure acts on the corrugated diaphragms at both ends of the sensor, the output signal
from the Wheatstone bridge on the sensor chip exhibits a good linear
relationship with the differential pressure, enabling accurate measurement of the
differential pressure. It is suitable for various gas and liquid differential
pressure measurements in industries such as petroleum, chemical, power, and
hydrology for pipeline applications.Product Features:
1. stainless steel structural design, making it compact
2. wide temperature compensation,ensuring stable and reliable
performances
3. The electronic connection can be selected as a plug-in or
DIN43650, M12 connector.
Applications:
1. Suitable for measuring differential pressure of various gases or
liquids in pipelines of industries such as petroleum, chemical, power, and
hydrology.
2. Applied in industrial on-site processes such as petroleum,
chemical, metallurgy, power generation, and hydrology
3.Pressure measurement for pipelines and furnace chambers
Performance Parameters:
| Measurement Range | 0-10KPa...~2MPa |
| Pressure Type | Differential Pressure |
| Single-side Overload | ≤3 times of the rated range |
| Static pressure | The minimum value between 5 times the rated range or 7 MPa |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability | ±0.03% (Typ.) ±0.05%FS (Max.) |
| Hysteresis | ±0.03% (Typ.) ±0.05%FS (Max.) |
| Long-Term Stability | ±0.5%F.S/Year(≤200KPa) ±0.2%F.S/Year(>200KPa) |
| Zero Temperature Drift | ±0.01%FS/ºC(>100KPa), ±0.02%FS/ºC (≤100Kpa) |
| Span Temperature Drift | ±0.01%FS/ºC(>100KPa), ±0.02%FS/ºC (≤100Kpa) |
| Compensation Temperature | 0-50ºC(0-10KPa, 0-20KPa) ,0-70ºC ,-10-70ºC |
| Operating Temperature | -30ºC~80ºC |
| Storage Temperature | -40ºC~100ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 304,316L |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Intrinsically safe and explosion-proof |
| Protection Rating | IP65 |
| Weight | ~0.45kg |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA |
3 wire |
| 0/1~5V |
| 0.5~4.5V | 5VDC |
Ordering tips:1. When selecting the product, please ensure that the measured
medium is compatible with the product's contacting parts.
2. To ensure reliable operation, it is recommended to install a
three-valve manifold between the measurement point and the
transmitter, ensuring a slow and uniform pressure application to
the positive and negative pressure chambers of the transmitter.
3. During installation, it is advisable to position the pressure
interfaces at both ends horizontally to minimize the impact of the
installation location on the product.
4. For special requirements such as strong vibration, instant
impact force, strong electromagnetic interference, or radio
frequency interference, please inform our company and specify these
requirements in the order
Order Guide:
| BP93420XX | Pressure Transmitter |
| Code | Outline Construction |
| DII | Differential Pressure Transmitter |
| Measurement Range | 0-10KPa...~2MPa |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal |
| S1 | 4~20mADC | S5 | 0~20mADC |
| S2 | 1~5VDC | S6 | 0~10VDC |
| S3 | 0~5VDC | S7 | 0.5~4.5VDC |
| S4 | 0~10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 Male |
| J2 | G1/2 Male |
| J3 | G1/4 Male |
| J4 | 1/2 NPT Male |
| J5 | Other |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 Plug |
| B3 | Sealed Cable Output |
| B4 | Other |
| Code | Pressure Type |
| D | Differential Pressure |
Q1. What is your terms of packing?
A: Generally, l cardboard boxes packing.
Q2. What is your trade terms & payment terms can you accept?
A: Trade terms : EXW, FOB, CFR, CIF for your convenient Payment
terms: 100% T/T or credit card or paypal advance before shipment
Q3. How about your delivery time?
A: Generally, standard type : 6-7 working days after confirm the
order.non-standard type: 8-10 working days after confirm the order.
Q4. What's your MOQ?
A: We have no MOQ demand, 1 piece for test purpose at first is
acceptable.
Q5. How do you ensure good product quality?
A: We have a complete quality control system; All of our products
are fully checked by IQC, OQC departments before ship to our
clients.
Q6. How long your quotation valid?
A: Our quotation valid for 12 months.
Q7. Can you accept OEM brand?
A: Yes, we can accept the OEM brand without extra charge.
Q8. How long is your product warranty?
A: 7 days replacement and 12 months repair free of charge for
quality problem.
Q9. How delivery the goods ?
A: We can send goods by DHL, TNT, UPS, SF, EMS for freight prepaid,
also canuse your own courier account to do the freight collect,
just for your convenience.
Q10. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.A: 7
days replacement and 12 months repair free of charge for quality
problem.
BPHT3351 Capacitive Differential Pressure Transmitter For Industrial Processes
