ASTM D 1790 Low Temperature Test Chamber Flexing Tester For Leather Cold Insulation Test
|
..., plastic material under low temperature Material: ＃304 stainless steel Weight 400kg Volume 105×105×151cm Corresponding test standard ASTM D1790,D1593,JIS K6545,HB-T2877, CNS-7705 2. Description This tester is used for...
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
Shoes Thermal Insulation Leather Testing Machine With Stainless Steel ASTM D 1790
|
..., Adidas GE-24 , Adidas GE-57, SATRA Tm92 , SATRA TM 161 This machine is suitable for the cold resistance test of various footwear. The test method is to fix the center of the insole with thermocouple. The shoe is filled with steel, put the shoes,...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
60r/Min 10mm Footwear Testing Equipment ASTM D1052 Ross Flexing Tester
|
ASTM-D1052 ISO-5423 Ross Flexing Tester Footwear Testing Equipment ASTM-D1052 Ross Flexing Tester Instrument introduction Install the shoe sole strip test piece or the whole shoe sole on the ROSS tortuous testing machine, make the incision fall directly above the center of the shaft of the ROSS tortuous testing machine, and drive the test piece or the whole shoe sole on the shaft for 90 degrees of freedom through the ROSS tortuous testing......
SKYLINE INSTRUMENTS CO.,LTD
|
Practical Antiwear Flexing Test Apparatus , Rustproof Footwear Testing Machine
|
...Testing Equipment Flexing Tester For Shoes JIS K6260 Footwear Testing Equipment Summary The tester applies to test flexion resistant for rubber products, shoe soles, PU, and other materials. The specimen by constant stretched, bended, and then observe its attenuation, damage and cracking. Reference ASTM testing specifications. Footwear Testing Equipment Corresponding Standard JIS K6260,ISO 132,ASTM......
Dongguan Lixian Instrument Scientific Co.,LTD
|
Low Temperature ASTM D1052 ROSS Flexing Tester For Shoe Soles
|
..., PU, PVC, TPR foam and other materials. And inspect its degree of damage, cracking and reduced decline by continuously stretch and bending. Standards: ASTM D1052, SATRA TM60, BS5131 : 2.1, GB 20265 section 4.2, ISO 5423, ISO4643, HG/T2411 Feature 1...
Gester International Co., Ltd
|
4 Groups ASTM D2099 MASSER Leather Testing Machine
|
ASTM-D2099 MASSER Leather Dynamic Waterproof Tester Application: The test machine is designed for the development of improved materials for the upper, waterproof processing, such as: leather, artificial leather, fabrics, etc., cut the test piece, installed in the test machine, under the water outside, apply a flexing......
Guangdong Aisry Instrument Technology Co., Ltd.
|
Rubber Fatigue Cracking Testing Machine ASTM D813 Demattia Rubber Flex Cracking Fatigue Failure Tester
|
Rubber fatigue cracking testing machine Description: Rubber fatigue cracking testing machine is used to rubber, leather, synthetic leather, sole and other continuous bending fatigue, observe the crack degree to understand or compare its durability. Test ......
Dongguan Haida Equipment Co.,LTD
|
Rubber Fatigue Cracking Testing Machine ASTM D813 Demattia Rubber Flex Cracking Fatigue Failure Tester
|
|
Rubber fatigue cracking testing machine Description: Rubber fatigue cracking testing machine is used to rubber, leather, synthetic leather, sole and other continuous bending fatigue, observe the crack degree to understand or compare its durability. Test ......
Hai Da Labtester
|
Bending Low Temperature Test Chamber For Shoe Flex ASTM D1790
|
...Test Chamber For Shoe Flex ASTM D1790 Application: This low temperature flex resistance tester is used for the cold weather resistance test of soles, rubber and plastic products of shoe and synthetic leather to understand the adaptive capacity to cold weather. The inner testing......
Perfect International Instruments Co., Ltd
|
90° Angle Flexing Leather Testing Machine ROSS Folding Tester For Rubber Material
|
...Flexing Leather Testing Machine ROSS Folding Tester For Rubber Material Use: ROSS Flexing tester is used to do right angle folding resistance test for rubber material,sole,PU....Specimen is flexed,bending unceasing,check the degree of decline, damaged,cracking. Specification: Test standards ASTM-D1052,ISO5423,4643 Specimen 6″(L)×1″(W)sole,0.25″,rubber,1/2″~1/8″(D) Grips 6 sets, 12 pcs can be testing. Flexing Angle Max.90° Test......
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|