IEC60068-2-63 Clause Annex A Calibration Device For Spring Hammer Test Apparatus
|
...Clause Annex A Calibration Device for Spring Hammer Test Apparatus Product Information: The Calibration Device for Spring Hammer Test Apparatus is designed and manufactured according to the standard requirements of IEC60068-2-63:1997 Annex A, IEC60068-2-75:1997 Annex B, and etc. The calibration principle of the spring impactor calibration device......
Sinuo Testing Equipment Co. , Limited
|
Spring Hammer Calibration Device Calibration As Per IEC 60068-2-75 Annex B.3 And Figure B.5
|
...75 Annex B.3 and figure B.5 for checking the impact energy accuracy of spring hammer calibration device. The calibation is made with an impact energy of 1J, which is achieved with a height of fall of 408±1mm, with a calibation striking element of 250g. 2....
Pego Electronics (Yi Chun) Company Limited
|
IEC 60068-2-75 Impact Testing Machine for Calibration of Spring Hammer Calibration Device
|
... Device for Spring operated impact hammers Its design and manufactured according to the test requirements of IEC 60068-2-63 Annex A, IEC 60068-2-75 Annex B. Feature: Comply with the requirement of standard IEC60068-2-63 and IEC60068-2-75 Specifications:...
Guangzhou HongCe Equipment Co., Ltd.
|
Multi Purpose Impact Testing Machine Calibration Device For Spring Impact Hammer
|
Calibration Device for Spring Impact Hammer SH-7 Parameters: Accuracy: 0.01J Repeat accuracy: ±0.01J Measurement range: 0~2J Guide groove diameter: 51mm The energy loss of the pendulum: <0.002J Trigger distance: >30mm Balance weight: 2J Copper weight 1 piece Standard: IEC 60068-2-63 Annex A, IEC 60068-2-75 Annex B Application: This device......
shanghai kerang technology co ltd
|
0.01J IEC Test Equipment Figure B.1 Calibration Device For Spring Hammer
|
... B.1 Calibration device. Standard description: The spring hammer to be calibrated is put in the release base and is then operated three times by means of the release device; it shall not be released manually. For each operation, the striking element of the...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Spring Hammer Impact Calibration Device, Spring Shock Energy Detection Equipment
|
... directly, to the energy of a pendulum, calculated from its mass and height of fall. And it's designed with the requirements of Annex B of IEC60068-2-75. Construction: It's maily made of a frame, a bearing, a drag pointer, a pendulum, a release base and a...
HK LEE HING INDUSTRY CO., LIMITED
|
IEC60745-2-5 Circular Saw Switch Endurance And Lower Guard Recovery Time Test Device
|
...Lower Guard Recovery Time Test Device Comply with standards: EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301, IEC60745-2-5:2003 Annex BB.20.102, EN 60745-2-5:2010 clause 17.101 and clause 19.102.3. Model:YW-......
KingPo Technology Development Limited
|
Circular Saw Switch Testing Machine Mechanical electrical control system
|
...Time Integrated Test Device CSG-2 Standard: EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301, IEC60745-2-5:2003 Annex BB.20.102, EN 60745-2-5:2010 clause 17.101 and clause 19.102.3. Application: It is used to test......
Dongguan Kingpo Technology Limited
|
Electric Vehicle Battery Enclosure Pressure Automatic Test System Single Station PLC Control
|
...Clauses of Electric Vehicle Battery Enclosure Pressure Automatic Test System This device complies with the standard IEC 60335-1: 2020-Annex BB-20.1. Equipment Overview of Electric Vehicle Battery Enclosure Pressure Automatic Test System Samples and Limits: This device......
Sinuo Testing Equipment Co. , Limited
|
120V IEC Test Equipment
|
IEC60745-2-5 Circular Saw Lower Guard Integrated IEC Test Equipment Product information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19, IEC60745-2-5:2003 and Annex BB. It is used to test the Durability Test and Close time ......
Guangzhou Shice Equipment Co., Ltd.
|
Submit your “clause annex a calibration device” inquiry in a minute :