2pfg robot cable bending testing machine

Brand Name:Infinity Machine

Model Number:IN-8100A

Place of Origin:Made In China

...jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested by connecting to the

Brand Name:Infinity Machine

Model Number:RS-8106B

Place of Origin:Made in China

... to do bending test. Test method is: short-circuit clamping one end of wire and fastening it on the rotary disc, leaving it rotating right and left hanging certain load, to assess whether wire is in good conduction after certain test cycles (can be set).

Brand Name:JIEDONG

Model Number:JD-3004

Place of Origin:Guangdong, China

...) JD-3004 product description: Applicable to the relevant manufacturers and quality inspection departments to bend (bend) the cable test. The test method is to fix the cable on the fixture. When the test is performed, the clamp swings left and right.

Brand Name:INFINITY

Model Number:IN-8100A

Place of Origin:MADE IN CHINA

Plug Bending Tester Model: IN-8100A Application: Apply for bending endurance test for cable connected with plug. Fix the sample on jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required ...

Brand Name:Infinity Machine

Model Number:RS-8010 & RS-8010A

Place of Origin:Made in China

...Bending Test Machine Capacity 5 KN AC Servo Motor High Accuracy Model: RS-8010 & RS-8010A Purpose: This test machine is suitable for adhesive tape, rubber, plastic, sponge, waterproof materials, electric wire & cable & thread, textile, net rope, non-woven fabrics ect nonmetal materials and metallic thread, metal foil, steel plate and metal rod to do stretching, compression, bending, peeling, cutting, tearing tests...

Brand Name:Infinity Machine

Model Number:RS-8000SA

Place of Origin:Made in China

...compression, flexural, peel, shear, tear, bursting, , fatigue tests for wire, metal foil, sheet metal and metal tape, rubber, plastic, air / sea foam, waterproof materials, wire and cable, textile fabrics, net rope, non-woven material by equipped with the

Brand Name:Infinity Machine

Model Number:IN-8100A

Place of Origin:Made In China

Plug Bending Tester Model: IN-8100A Application: Apply for bending endurance test for cable connected with plug. Fix the sample on jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required ...

Brand Name:Herrman

Model Number:GWQ-90

Place of Origin:China

...cable repeated bending testing machine optic fiber cable repeat beading detector DESCRIPTION The equipment is used to test optical cable resistance repeated bending properties. By applying repeated bending force, for the qualified optical cable, no fiber fracture, fiber attenuation values meet standard, no optic cable jacket cracking. The equipment adopts the man-machine interface and PLC control, TFT true color screen display test

Brand Name:Neide

Model Number:ND-521

Place of Origin:China

*, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothing: antialiased;}p[style^="text-align"] img{display:inline-block}input, button, textarea, select {font: inherit;}p, h1, h2, ...

Brand Name:AI

Model Number:AIC6223A

Place of Origin:China

...Bending Test Machine is suitable for repeated U-shaped bending fatigue testing of high flexible cables such as TUV, VDE, UL, etc., in applications that require continuous bending and high-speed movement, such as internal wiring of machines, high-speed drag chain system cables, connecting cables of machine moving parts, internal wiring of machines, as well as repeated bending fatigue testing...

Brand Name:ZL

Model Number:ZL-1027B

Place of Origin:China

... standards "General safety requirements for flexible cord components and power cords". It is suitable for bending test of power cord and DC cord by related manufacturers and quality inspection departments. It is used to test the bending resistance and

Brand Name:YUYANG

Model Number:YYW-002

Place of Origin:China

.... This improves testing capacity.IEC60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test, the cords need to be rotated 90°. The plug sockets are designed to make this rotation easy and accurate. This tester has

Place of Origin:China

Brand Name:KeRang

...Bending Test Machine HDX1307 Standard:IEC60811-1-4 clause 8.1 and 8.2, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general application-Test at low temperature. Application:This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm. Test sample:Cables...

Brand Name:ZL

Model Number:ZL-1018

Place of Origin:China

...Cable Repeated Bending Testing Machine ​ Specifications: Wire Torsion Testing Machine Price mainly used to test the capacity of bearing deformation of the metal wires and other wire ropes whose diameter are φ 6~φ 20mm during the reversing. The test can show the surface defects of wire during the test process. ZL-1018 Wire Torsion testing Machine.pdf Technical parameters: Range of specimen diameter 0.1-1mm 1-3mm 3-10mm Test

Brand Name:ZONSKY

Model Number:ZY6030C6

Place of Origin:DONGUAN CHINA

..., UL, etc. The structure of the machine is a tandem 6-station, which is mainly used for the repeated torsion test of the longitudinal installation of the metal wire to detect the plastic deformation performance and the obvious defects of the metal wire in

Brand Name:KingPo

Model Number:KP-8820A

Place of Origin:China

...Bending Test Machine / Large cable Diameter Determination Machine 90°bending test is is carried out in the process as follows in which to test(Bending of JIS C3005 4.27.4 Section).This test is able to determin about large cable diameter of cable outer also. Mount a sample of about 1m taked from the finished product,which is fixed one end to to 90°bending test...

Brand Name:AI

Model Number:AIC-6034A

Place of Origin:CHINA

... Core which can not make Dumbbell test specimen(Shorter axis of sheath≦20mm flat cable). Reference standards ● GB2951.14-2008, Sect 8.1&8.2 Common test methods for insulating and sheathing materials of electric and optical cables - Part 14: Methods for

Brand Name:MIYU

Model Number:MY-XC-360

Place of Origin:China

360-degress, Wire/Cable Bending Tester (MY-XC-360), with competitive price, both OEM and ODM available from us Technical Specification 1. Test standard: clip, flat angle 2. Test station: 6 3. Test speed: 5-60 times / minute adjustable 4. Test times: ...

Brand Name:MIYU

Model Number:MY-XC-C6

Place of Origin:China

180-degress, Wire/Cable Bending Tester (MY-XC-C6), Sheet metal material with white color Description Technical Specification 1. R angle :R3,R5,R12.7, replaceable fixture 2. Test speed: 5-60 times / min, adjustable 3. Test times:99999999 times 4. Rotation ...