backflow test equipment

Brand Name:kingpo

Model Number:ISO 9360-1

Place of Origin:china

...Test Equipment ISO 9360-1 Anaesthetic and respiratory equipment –Heat and moisture exchangers (HMEs) for humidifying respired gases in humans –Part 1: HMEs for use with minimum tidal volumes of 250 ml Measurement of moisture loss- HME 6.2 Measurement of moisture loss 6.2.1 Principle The performance of an HME shall be measured by recording the mass of water lost from the test apparatus specified in 6.2.2. 6.2.2 Test apparatus The test

Brand Name:HongCe

Place of Origin:China

...Testing Equipment IEC 60598-2-13 ​ Production introduction: This test equipment conforms to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 standard requirements. It is used for the ground accessed luminaires static load test and torque test. This equipment...

Brand Name:HongCe

Model Number:HC-500

Place of Origin:China

... (IP Code)>. This equipment is applied in IPX3 ,IPX4 waterproof degrees testing purposes, which are widely adopted by luminaire products, electrical and electronic products certification institutions, testing organizations and production enterprises for

Brand Name:HongCe

Model Number:HC-IWS01

Place of Origin:China

Ice Water Shock Submersion Test Equipment Standard The Ice Water Shock Submersion Test Equipment is designed and produced as the standard of the ISO 16750-4:2010 5.4.3. Test method Connect the DUT to the test equipment. Operate the DUT in a hot air oven ...

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

...Testing Equipment Needle Flame Test Standard: IEC 60695-11-5 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance Application: This part of IEC 60695 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess the fire hazard by a simulation technique. The results of this test

Brand Name:HongCe

Model Number:HDD8304

Place of Origin:China

...Testing Equipment For Circular Saw Switch And Lower Guard Standard of IEC Testing Equipment: IEC 60745-2-5 Hand-held motor-operated electric tools – Safety – Part 2-5: Particular requirements for circular saws Annex BB.20.102, Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301 Application of IEC Testing Equipment: It is used to test...

Brand Name:HongCe

Model Number:HH0820

Place of Origin:China

...Testing Equipment from IPX1 To IPX8 Open Type Standard of IP Testing Equipment: IEC60529 degree of protection provided by enclosures (IP Code), clause 14.2.1, 14.2.2, 14.2.3, 14.2.4, 14.2.5, 14.2.6, 14.2.7, 14.2.8, and figure 3, figure 4, figure 5 and figure 6, IPX1, IPX2, IPX3, IPX4, IPX5 IPX6, IPX7 and IPX8, Table 3. Application of IP Testing Equipment: It is used to test...

Brand Name:HongCe

Model Number:HK1501

Place of Origin:China

...Testing Equipment Adjustable Test Speed Standard of Electrical Appliance Testing Equipment: IEC 60335-1: 2020 Household and similar electrical appliances – Safety – Part 1: General requirements clause 7.14 Application of Marking Durable Testing Equipment...

Brand Name:HongCe

Model Number:HJ124

Place of Origin:China

... testing of PACK battery packs, offering comprehensive functions and convenient operation. It is capable of performing various functions such as vacuuming, helium filling, pressure and concentration detection, ensuring accurate and reliable testing.

Brand Name:HongCe

Model Number:NF-1

Place of Origin:China

... to the requirements of the relevant standards IEC60695-11-5, the needle-flame tester is the special instrument used for the fire hazard test of the small flame caused by the fault conditions in the simulating technology assessment equipment. It is

Brand Name:HongCe

Model Number:HDD8304

Place of Origin:China

...Testing Equipment For Circular Saw Switch And Lower Guard​ Standard of IEC Testing Equipment: IEC 60745-2-5 Hand-held motor-operated electric tools – Safety – Part 2-5: Particular requirements for circular saws Annex BB.20.102, Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301 Application of IEC Testing Equipment: It is used to test...

Brand Name:HongCe

Model Number:HC-WPVT-003

Place of Origin:China

...Test Bench | Multi-Station Pump Durability Testing Equipment | Automatic Pump Life Cycle Test System for Performance & Reliability Validation HongCe 5-Station Pump Endurance Test Bench is a professional, factory-direct pump testing solution designed for long-cycle durability, performance verification, and reliability testing. As an original manufacturer, HongCe provides stable, precise, and fully supported testing

Brand Name:HeJin

Model Number:AM0008

Place of Origin:China

...Testing Machine Auto Parts Test Equipment 0 ~ 250mm Product Description: Test trip: 100cpm Test speed: 99cpm Scope of application: Alternating load durability testing machine Type: Alternating load durability testing machine Auto Parts Test Equipment Standard: GB15083-2004 Strength Requirement and Test Method of Automobile Seats, Their Anchorages and Any Head Restraintsand Auto Parts Test Equipment...

Brand Name:BOTO

Model Number:PCT-30

Place of Origin:China

...testing machine laboratory equipment testing equipment lab machine PCT pressure chamber Temperature & Humidity Test Chamber, High Temperature Test Chamber,Dry Oven , Alternating Temperature Test Chamber, Alternating Temperature & Humidity Test Chamber, Temperature Rapid Change Test Chamber,Temperature & Humidity Rapid Change Test Chamber, Alternating Temperature Alternating Humidity Rapid Change,Thermal shock Test

Brand Name:KingPo

Place of Origin:China

...test system suitable for durability project test of hand-held electric power tool below2.5KW; meet standard of GBB3883.1-2008,GB3881.7-2012 Term17,IEC6074-2-6:2003;professional testing equipment for professional test institution and power tool manufacturer. Electric hammer no-load service life,endurance test...

Brand Name:KingPo

Place of Origin:China

... test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel shall be

Brand Name:Kingpo

Place of Origin:China

...Test and Close time Test Equipment with Circular Saw at a 90° cut Product information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19,IEC60745-2-5:2003 and Annex BB. It is used to test the Durability Test and Close time Test...

Brand Name:kingpo

Model Number:IEC 60335-1 Figure 7

Place of Origin:china

Test finger nail , IEC 60335-1 Figure 7 Test Equipment Test finger nail Product information: The test finger nail complies with the IEC 60335-1figure 7 standard requirements. It is applicable for the non-removable components which are used for electric ...

Brand Name:kingpo

Model Number:KP-SW-280

Place of Origin:china

... one of the following apparatus: – a twin enclosed carbon-arc (see C.2.3) with continuous exposure for a minimum of 720 h. The test apparatus shall operate with a black-panel temperature of 63 °C ± 3 °C in a relative humidity of (50 ± 5) %; or –

Brand Name:kingpo

Model Number:KP-SUN800G

Place of Origin:china

...: – a twin enclosed carbon-arc (see C.2.3) with continuous exposure for a minimum of 720 h. The test apparatus shall operate with a black-panel temperature of 63 °C ± 3 °C in a relative humidity of (50 ± 5) %; or – a xenon-arc (see C.2.4) with