electrochemical two electrode oxygen sensor

Brand Name:SUSA

Model Number:4O2-GP

Place of Origin:Britain

Product Description: 4O2-GP Electrochemical Two-electrode Oxygen Sensor Is Suitable For Most Life Safety Detectors Features: Basic performance Working principle Electrochemical two-electrode detection range 0 to 25% O2 Maximum load 30% O2 Output signal 100...

Brand Name:envitec

Model Number:oom201

Place of Origin:france

... battery is mainly compatible with Dräger 6850645 oxygen battery Product Description: O2 Sens Medical Oxygen Sensor Main function: monitoring inhaled oxygen concentration in anesthesia breathing equipment Performance parameters: electrochemical principle;

Brand Name:KACISE

Model Number:KQT-O2

Place of Origin:CHINA

...the working electrode and the corresponding oxidation reaction of the anode material. The magnitude of the current is proportional to the concentration of oxygen. The concentration of oxygen can be determined by measuring the magnitude of the current. 2.

Brand Name:Desun Uniwill

Model Number:DS-380

Place of Origin:China

... galvanic. Each type has its own advantages and disadvantages, and the cost varies accordingly. The electrochemical sensors are the most commonly used and have a moderate cost range. The cost of a basic electrochemical sensor can range from $50 to $150.

Brand Name:City Tech

Model Number:MOX-20

Place of Origin:UK

CITY MOX-20 Medical Oxygen Sensor for Resmed Elisee150 MOX-20 Electrochemical O2 sensor Specification of Medical oxygen sensor: Range 0-1500mBar Output Voltage 0.8-1.25V in air Measurement range 0 to 100% O2 Output connector Molex 3 pin Accuracy Within +/-...

Brand Name:Drager

Model Number:MX01049

...Oxygen Sensor MX01049 for Medical Equipment Description The oxygen sensors are mainly used to measure and monitor the O2 concentration of inhaled and/or expired gases in anesthesia and respiratory equipment. The gas concentration is detected based on the principle of electrochemical reaction. When the gas to be measured enters the sensor, the gas molecules react with the redox products on the electrode

Brand Name:Med Accessories

Model Number:MOX4

Place of Origin:China

Multipurpose 02 Sensor Medical,Practical MOX4 Oxygen Sensor MOX4 OXYGEN SENSOR O2 sensor.pdf Operating Principle Partial pressure electrochemical Output 9 mV to 13 mV in 210 mBar O2 Measurement Range 0 mBar to 1500 mBar O2 Response Time <...

Brand Name:JUGE

Model Number:AG4773D

Place of Origin:Nanjing, China

... chloride (KCl) as the electrolyte, and utilizes a silicone rubber permeable membrane as the oxygen diffusion layer. During measurement, a 0.68V polarization voltage is applied between the anode and cathode. Oxygen permeates through the membrane and is

Brand Name:Daruifuno

Model Number:OPD79

Place of Origin:China

...Oxygen Sensor for Water station Compared with traditional polarographic electrodes, the fluorescence dissolved oxygen sensor developed and produced by Delfino is more suitable for real-time dissolved oxygen monitoring. Its shell is ABS sturdy and durable, the measurement results are accurate, and the maintenance is very easy. At the same time, it is also a digital electrode...

Model Number:OOM102-1

.... It is designed to provide accurate and reliable measurements of oxygen levels in various healthcare settings, ensuring patient safety and effective oxygen therapy. The OOM102-1 oxygen sensor utilizes advanced electrochemical technology to detect and

Brand Name:ENVITEC

Model Number:OOM202

Place of Origin:Germany

For O2 detecting, 0-100%VOL OOM202, Oxygen battery PB760, PB840 For various ventilators and oxygen concentrators OOM202-2S 001-33 Issue 3 GAS SENSOR Oxygen (O2 ) Gas Sensor Honeywell EnviteC Series Oxygen Sensor: OOM202-2S FROM STANDARD SENSORS TO ...

Brand Name:HiYi

Model Number:LH-DO59

Place of Origin:China

... is platinum electrode and the anode is silver / silver chloride electrode. The cathode and anode are immersed in the electrolyte chamber, which is isolated from the external measurement environment through a diaphragm. Dissolved oxygen diffuses to the

Brand Name:Endress+Hauser

Model Number:COS41-4F

Place of Origin:Germany

...oxygen sensor Oxymax COS41-4F SPECIFICATIONS Measuring principle:Amperometric oxygen measurement Application:Aeration tank, river monitoring, water treatment, fish farming. Characteristic:Amperometric 2-electrode system to measure dissolved oxygen. Measurement range:0,05 - 20mg/l Measuring principle:Closed (membrane covered) amperometric 2-electrode sensor...

Place of Origin:Jiangsu, China

Brand Name:KELISAIKE

... single-chip microcomputer. After the filtration operation inside the STM32 single-chip microcomputer, the oxygen concentration in the air is calculated and then output from the serial port. The module is compatible with 4OXV, Me2-O2, AAY80-390R and other

Brand Name:Careutech

Model Number:MLF-19GE

Place of Origin:China

Oxygen Sensor MLF-19GE For GE HealthCare Carestation 600/700 series ► Brief Description The MLF-19GE is an essential electrochemical cell that accurately measures the concentration of oxygen in the gas mixture being delivered to a patient. ► Features Oxygen Monitoring Primary Function: Measures the fractional concentration of inspired oxygen...

Brand Name:Endress+Hauser

Model Number:COS41-4F

Place of Origin:Germany

...oxygen sensor Oxymax COS41-4F SPECIFICATIONS Measuring principle:Amperometric oxygen measurement Application:Aeration tank, river monitoring, water treatment, fish farming. Characteristic:Amperometric 2-electrode system to measure dissolved oxygen. Measurement range:0,05 - 20mg/l Measuring principle:Closed (membrane covered) amperometric 2-electrode sensor...

Brand Name:Endress+Hauser

Model Number:COS41

Place of Origin:GERMANY

... oxygen sensor​ from the Oxymax series, designed for continuous monitoring in water, wastewater, and industrial applications. Using a robust two-electrode amperometric system, it ensures high accuracy and long-term stability in harsh environments.

Brand Name:Teledyne Analytical Instruments

Model Number:E-2

Place of Origin:USA

SPECIFICATIONS Manufacturer :Teledyne Analytical Instruments Product No. : E-2 Introduction: Teledyne’s patented Micro-fuel Cell (MFC) is a unique,electrochemical transducer that provides versatile oxygen sensing capability by combining the following ...

Brand Name:..

Model Number:KE-50

Place of Origin:..

Brand Name:Zetron

Model Number:ZN3101

Place of Origin:China

... high-performance electrochemical sensor with new microcomputer technology based on the principles of electrochemical detection. FEATURES Imported fuel cell sensor adopted, featuring long service life, high accuracy, and quick response and immune to the