electronic test probes

Brand Name:PEGO

Model Number:PG-TP884

Place of Origin:China

...Test Probes 1. Introduction of Gauge A and B test probes: The gauge A and B test probes are strictly designed according to IEC62196-1-2022 clause 10.2 figure 9 and figure 10. It's used to test the EV socket-outlet. And it's consisted of test wire, insulated handle and thruster. Testing...

Brand Name:Pego Electronics

Model Number:PG-TPB-2

Place of Origin:China

...Test Probe B with 125mm Circular Stop Face for Verifying the Stability and Mechanical Hazards of the Kitchen Machines 1. Introduction Similar test probe B is designed to meet the test requirements of IEC60335-2-14 clause 20.2, the finger part except the length is same as the test probe B of IEC61032, but having a circular stop face with a diameter of 125mm, and the distance between the tip of the test...

Brand Name:HongCe

Model Number:HT-I04

Place of Origin:China

... for earth or antenna or for audio, video or associated signals, shall not involve the risk of an electric shock. The test is not applied to TERMINALS marked with the symbol of 5.3 b). Test Finger Probe NOTE See also 1 5.1 .2. Compliance is checked by

Brand Name:HongCe

Model Number:HDD8301

Place of Origin:China

... on to the blade shall cover at least the smallest recommended blade-cutting edge zone. The space between the upper guard and the blade shall be designed such that the test probe 'a' of Figure 105 when

Brand Name:HongCe

Model Number:HT-I02

Place of Origin:China

... – Part 1: General requirements clause 8.1.1, 8.2, 22.1, 29.1, 29.2 and ect.; IEC 61032 Protection of persons and equipment by enclosures –Probes for verification Application of Test Probe B of IEC 61032: Appliances shall be constructed and enclosed so

Brand Name:HongCe

Model Number:HT-I12

Place of Origin:China

...Testing Equipment Test Probe 18 of IEC 61032 Standard of Electrical Appliance Testing Equipment: IEC 60335-1: 2020 Household and similar electrical appliances – Safety – Part 1: General requirements clause 8.1.1; IEC 61032 Protection of persons and equipment by enclosures –Probes for verification figure 12 Application of Test Probe...

Brand Name:Sinuo

Model Number:SN2210-2E

Place of Origin:China

... similar to that of probe B of IEC 61032 but having a non-circular stop face with a diameter of 56mm. Technical parameters: Model SN2210-2E Name Similar Test Probe B But Having a Non-Circular Stop Face with Diameter 56mm Joint 1 30±0.2 mm Joint 2 60±0

Brand Name:kerang

Model Number:HT-I20/21

Place of Origin:CHINA

... HT-I21 test probe with 1N force is for testing whether the live parts with the protection of socket can be touched. Test sample:Socket. Feature:Nylon handle + probe. Parameters: 1,Test probe with force of 20N HT-I20: The probe part: 3+0.03 0×1+0.015 0

Brand Name:Sinuo

Model Number:SN2210-3

Place of Origin:China

... by many standards such as IEC60529 for IP3 testing, IEC 60335-1, IEC60065 and etc. This test probe C is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a tool.

Brand Name:Sinuo

Model Number:SN2210-4

Place of Origin:China

... by many standards such as IEC60529 for IP4 testing, IEC 60335-1, IEC60065 and etc. This test probe D is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.

Brand Name:Sinuo

Model Number:SN2210-5

Place of Origin:China

...Test Probe 1 Figure 5 Ф50mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 test probe 1 figure 5, and required by many standards such as IEC 60529 for IP1 testing, IEC 60335-1, IEC 60065 and etc. This test probe...

Brand Name:Sinuo

Model Number:SN2210-6

Place of Origin:China

...Test Probe 2 Figure 6 Ф12.5mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 test probe 2 figure 6, and required by many standards such as IEC 60529 for IP2 testing, IEC 60335-1, IEC 60065 and etc. This test probe...

Brand Name:SKYLINE

Place of Origin:China

IP2X Test Prode Product information The probe is made according to IEC61032 test tool 6, GB/T16842 test tool 6, IEC60529IP2X, GB4208IP2X, UL and other standards. It is used to test the prevention of solid foreign objects with a diameter of 12.5mm or more ...

Brand Name:HeJin

Model Number:HT-I04

Place of Origin:China

IEC61032 Test Finger Probe Figure 4 Test Probe D With 1mm Diameter Wire Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 4 test probe D. IEC 60529 Degrees of protection provided by enclosures (IP Code...

Brand Name:HeJin

Model Number:HT-I05

Place of Origin:China

IEC61032 Test Finger Probe Figure 5 Test Probe 1 With 50mm Diameter Sphere Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 5 test probe 1. IEC 60529 Degrees of protection provided by enclosures...

Brand Name:PEGO

Model Number:PG-TP31

Place of Origin:China

...protection against access to hazardous mechanical parts of the grinding system of food waste disposal units. Specification: diameter of probe 25mm Length of probe 80mm Diameter of front baffle 60mm Diameter of bottom baffle 110mm Total length of probe and

Brand Name:SHC

Model Number:SC-Fig6

Place of Origin:China

... SФ12.5+0.20 mm SФ12.5+0.20 mm Force ---- 50N Standard IEC61032 IEC60529 Product information: This test sphere probe confirms to IEC61032 figure 6 probe 2, IEC60529 of IP2. It is intended to verify the degree of protection of enclosures against ingress of

Brand Name:SHC

Model Number:SC-Fig6

Place of Origin:China

... SФ12.5+0.20 mm SФ12.5+0.20 mm Force ---- 50N Standard IEC61032 IEC60529 Product information: This test sphere probe confirms to IEC61032 figure 6 probe 2, IEC60529 of IP2. It is intended to verify the degree of protection of enclosures against ingress of

Brand Name:kingpo

Place of Origin:china

Telecom Test Probe Usage: Check access to telecommunications voltages. The Telecom Access Probe is required in IEC 60950, IEC 60065, UL and CSA Standards. It is used to check limited access to telecommunications voltages (TNV), ...

Brand Name:kingpo

Model Number:IEC62368-1-Figure V.1

Place of Origin:china

...Test Probe Simulating Human Finger Movement Application: This jointed Test Finger Probe is strictly designed and manufactured according to UL507,UL982,UL1278,UL1062,UL1310,UL474,UL60065 . Palm simulator and restricted joint movement simulates human finger movement. Made of all nylon. Bell-Core accessory available.This ul jointed test finger probe...