plastic fire testing equipment

Model Number:LR-F060

Place of Origin:China

Brand Name:Lonroy

Plastic Film Testing Equipment ASTM F2029 Heat Sealing Tester 50Hz Film Testing Equipment Film Testing Equipment Film Te ASTM F2029 Heat Sealing Tester for Packaging Plastic Film 1. Use Heat Seal Tester is based on the heat sealing method and is ...

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

...arrangement and guidance” Equipment Overview Samples and Restrictions: Lighting equipment, low-voltage apparatus, household appliance, machine tool electric appliance, electrical machine, electric tool, electronic instrument, ...

Brand Name:DAXIAN

Model Number:DX8790

Place of Origin:China

...test machine ISO 12468-1 Product description: The preparation of the "Test Method for Fire Response of Roofs and Roof Cover Products" is mainly based on EN1 1187 t1 test method and ISO 12468-1. This method specifies three test methods under fire ...

Brand Name:AI

Model Number:SBI

Place of Origin:CHINA

Single Burning Item Test System EN13823 SBI.pdf Introduction The Single Burning Item (SBI) test is a method of test for determining the reaction to fire behavior of building products (excluding floorings) when exposed to the thermal attack by a single ...

Brand Name:Lonroy

Model Number:p-us7

Place of Origin:China

... Tensile Strength Testing Machine 1.Introduction It is widely used in rubber and plastic, polymer materials, adhesives, adhesive tapes and other industries. It is suitable for testing the tensile strength, elongation, elastic modulus, compressive strength,

Brand Name:SKYLINE

Model Number:SL-IEC33

Place of Origin:China

...to and including 0,6/1,0 kV Specification 2. Cable and cable line integrity combustion test machine design principle: The cable and cable integrity fire tester is divided into three parts: the combustion box, the combustion frame, and the control box, all

Brand Name:DAXIAN

Model Number:DX8298

Place of Origin:China

..., which is mainly used to evaluate the fire performance of walls and ceilings, and gives test results. As an indicator of flame propagation. 2. DURING THE TEST, THE SPECIMEN IS EXPOSED TO THE TUBULAR TORCH, AND THE HEAT RELEASE OF THE LAMP IS 530 J/S.

Brand Name:DAXIAN

Model Number:DX8221

Place of Origin:China

...Fire Resistance Testing Machine , Helmet Flammability Test Chamber Meet the standards: GB/T 2812-2006 "hard hat test method" and GB/T 2811-2007 "hard hat" in the helmet flame test standards and IS0 3873:1987. It is mainly used for testing...

Brand Name:AI

Model Number:FRP-T

Place of Origin:CHINA

... by radiant heat ASTM E 648: Critical Radiant Flux of Floor standard test - covering system uses radiant heat energy ASTM E 970: Using a Radiant Heat Energy Source, test insulation floorinsulationinsulation standard test for Critical Radiant Flux using a

Brand Name:SKYLINE

Place of Origin:China

Power Cable Busway Flammability Test Furnace Uses Suitable for the test of flame retardant, fireproof and fire resistance of busbar trunking system (busbar trunking) Technical parameters 1. Working voltage: AC380V±10% 50Hz; power consumption: 5KW 2. ...

Brand Name:HAIDA

Model Number:HD-H209

Place of Origin:Guangdong, China (Mainland)

Battery Fire Test Chamber Description: Battery Fire Test Chamber suit for lithium battery (or battery pack) flame resistance test. Drill a circular hole with a diameter of 102mm on an experimental platform, place a wire mesh on the round hole, place the ...

Brand Name:Haida

Model Number:6002-HD

Place of Origin:China

... for parts or components under fault or overload conditions. It applies to plastic and non-metallic insulating materials used in electrical and electronic products, components, and household appliance parts, such as switch housings and relay sockets.

Brand Name:DAXIAN

Model Number:DX8362

Place of Origin:China

... 2000/147/EC. Standard: Method for EN 13823 - SBI is the full-scale method EN 14390 - Room corner. Test according to ISO 5660 - Cone Calorimeter could

Brand Name:DAXIAN

Model Number:DX8378

Place of Origin:China

Flame Retardant Wood Combustion Test Device Scope of application: Mainly applicable for testing the combustion quality loss rate and flame burning time of indoor decoration wood panels and wooden products (d ≤ 20mm) that have been treated with flame ...

Brand Name:SKYLINE

Model Number:SL847

Place of Origin:China

... cover in EN136 standard. Its purpose is to detect whether the mask will cause protection failure after being exposed to the standard heat radiation source after the standard test time. Performance characteristics 1. Equipped with

Brand Name:Daxian

Model Number:DX8613

Place of Origin:China

...manufactured according to ISO9151 and EN367; The instrument measures the heat transfer performance of protective clothing under the condition of fire source; The instrument is simple in operation, accurate in data, safe and reliable, and widely used in

Brand Name:DAXIAN

Model Number:DX8368B

Place of Origin:China

..., warehouses and construction methods), as well as extensive testing and verification of fire performance of raw materials, buildings and solid models. Standards: - ISO 9705 - ISO 13784-1 - ASTM E 1537 - EN 14390 - ISO5660-1 Structures: - The equipment

Brand Name:DAXIAN

Model Number:DX8621

Place of Origin:China

... Radiation Heat Exposure Tester Fire Testing Equipment Product Description: The instrument is suitable for determining the effect of heat transfer through materials or material components when protective equipment is exposed to radiant heat. The instrument...

Brand Name:SKYLINE

Model Number:SL-FL1685

Place of Origin:China

...Testing Machine is designed accordance with the relevant provisions of UL1685,GB18380.3 standard about wire and cable burning test requirements. And meet with IEC 60332-3-10, KS C IEC 60332-3-21 ~ 25 (A ~ Class D) standards. Applications Bunched Cable Vertical Flame Spread Tester is an equipment which used to test...

Brand Name:DAXIAN

Model Number:DX2031

Place of Origin:China

...test the combustion performance of medical masks after contacting the flame at a certain linear velocity. It is a special test instrument for the flame retardance of medical masks. It is a test item to detect the flame retardancy of protective masks. Combustion power source. The system is equipped...