plug in socket tester

Brand Name:PEGO Group

Model Number:PG-NSP

Place of Origin:China

...mechanical strength of non-solid pins of plugs and portable socket-outlets. A force of 100N is exerted on the pin which is supported as shown in IEC60884-1 figure 14, for 1min in a direction perpendicular to the axis of the pin, by ...

Brand Name:Pego Tester

Model Number:PG-PIT

Place of Origin:China

Plug Torque Test Device (plug-in Test Apparatus) 1. Introduction Plug torque test device is designed according to IEC60065 figure 11, it is applied to check the socket outlet mechanical strength of direct plug-in equipment. 2. Specification ● Distance between contact surface and axis surface: 8mm ● Force arm: 0-200mm ● Weights: 1 piece of 2.5N, 1 piece of 1N ● Configuration: 1 piece of all-purpose plug (apply to GB and BS plugs...

Brand Name:kingpo

Place of Origin:china

... Movement of pins Plugs shall be tested for pin movement by clamping the pin or pins not under test in a rigid holding block positioned 5 ±0.5 mm from the plug face and applying a force of 18 ±1 N to the pin under test. The design of the block shall be

Brand Name:SHC

Model Number:SC-CRLS

Place of Origin:China

...Socket Outlet Torque Balance Test Apparatus Technical parameters: weight 2.5N*1, 1N*1 Plug UL plug*1, European plug*1,all-purpose plug*1 Conforms to standard IEC60884,VDE0620,IEC60598,IEC60065Fig11 Arm of force 0-200mm The distance from the contact surface and the Axis of the surface 8mm Product information: The plug torque tester...

Brand Name:SHC

Model Number:SC-CRLS

Place of Origin:China

...Socket Outlet Torque Balance Test Apparatus Technical parameters: weight 2.5N*1, 1N*1 Plug UL plug*1, European plug*1,all-purpose plug*1 Conforms to standard IEC60884,VDE0620,IEC60598,IEC60065Fig11 Arm of force 0-200mm The distance from the contact surface and the Axis of the surface 8mm Product information: The plug torque tester...

Brand Name:PEGO GROUP

Model Number:PG-UL498

Place of Origin:China

Hardened Steel UL498 Attachment Plugs and Receptacles Test Pins and Test Plug 12 months Guaranty​ 1. Introduction The attachment plugs and receptacles tester includes test probes, test blade, test pin and etc. which are completely designed according to ...

Brand Name:PEGO GROUP

Model Number:PG-CTA

Place of Origin:China

... Electric Socket Tester ​ 1. Introduction Apparatus for compression test is designed according to IEC60884-1 clause 25.4 and figure 38, it is applied to verification the compression resistance performance in heating of cover of moveable socket-outlet, ...

Brand Name:HongCe

Model Number:HC9906

Place of Origin:China

IEC60884clause 12.14 testing equipment of Lateral Strain for socket-outlets with 5N weight​ Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the socket-outlets ratings up to 16A and 250V whe...

Brand Name:PEGO GROUP

Model Number:PG-TB3

Place of Origin:China

BS1363-1 Figure 20 Plug Socket-Outlet Tumbling Barrel Made by Thick Plywood 1. Introduction Tumbling barrel is designed according to BS1363.1 figure 20 for plug ballast, transformers and socket outlet. The tumbling barrel is turned at a rate of five ...

Brand Name:kingpo

Place of Origin:china

BS1363-3:1995 figure 36 | Torque socket tester

Brand Name:PEGO

Model Number:PG-PL

Place of Origin:China

IEC60884-1 30A Power Load Cabinet used for Plug Socket Life Tester 1. Introduction: Power Load cabinet is a support equipment designed according to IEC60884-1 and UL1054, it is applied to simulate the electrical appliance in charged state, then to do the ...

Brand Name:kingpo

Place of Origin:china

IEC60884clause 12.14 testing equipment of Lateral Strain for socket-outlets with 5N weight​ Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the socket-outlets ratings up to 16A and 250V whe...

Brand Name:Sinuo

Model Number:SN2123B1M

Place of Origin:China

...Plugs And Socket Resistance Test Product Information: Standard: Conforms to IEC 60598-1 clause 4.13.6, figure 25. Application: This device is suitable for checking whether plug-ballast/transformers and mains socket-outlet-mounted luminaires have adequate mechanical strength. Test sample: Plug-ballast/transformers and mains socket-outlet-mounted luminaires. Feature: This tester...

Brand Name:kingpo

Model Number:KP-BCL04

Place of Origin:china

... It is suitable for checking the maximum force required to pull the plug out of the socket and the single pole pin pulled out from the socket assembly. Whether the minimum force required is within the range specified by the standard. Parameter: Standard

Place of Origin:Guangdong, China (Mainland)

Brand Name:HABOTEST

Model Number:HT106B

...Socket Tester Pro Features: GFCI (US) / RCD check button Home Improvement Assistance LCD Display Voltage Measurement Easy to use 12 months warranty (1 to 1 exchange) Function HT105 HT106 HT105B HT106B HT105D HT106D HT105E HT106E Voltage range AC 48~250V GFCI test >5mA >5mA RCD test >30mA >30mA >30mA >30mA >30mA >30mA Voltage measurement (48V~250V/45~65Hz) √ √ √ √ LCD display √ √ √ √ Backlight √ √ √ √ Socket

Brand Name:HongCe

Model Number:HC9906

Place of Origin:China

IEC60884clause 12.14 testing equipment of Lateral Strain for socket-outlets with 5N weight​ Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the socket-outlets ratings up to 16A and 250V whe...

Place of Origin:China

Brand Name:HongCe

Model Number:FP-1

Apparatus To Verify The Fixation Of Pins In The Body Of The Plug Product details: This device conforms to the standard of IEC 60884-1 Fig30. It is used for testing the firmness of the plug and the plug pin. The plug is placed on a rigid steel plate ...

Brand Name:Sinuo

Model Number:SN2116E

Place of Origin:China

IEC60884-1 Six Stations Switches Plug and Sockets Endurance Tester Standards & Clauses: This apparatus conforms to IEC60884-1:2006 “Plugs and socket-outlets for household and similar purposes- Part1: General requirements” clause 20 and 21 IEC61058-1:...

Brand Name:PEGO GROUP

Model Number:PG-AS/NZS3112

Place of Origin:China

... of clause 3.14.8.3 and clause 3.14.8.2, includes three-pins maximum withdrawal Force Test Plug (10A/250V) to check the maximum force required when the plug is pulled out of the socket, and single-pin minimum withdrawal force test pin to check the

Place of Origin:Guangdong, China

Brand Name:Habotest

Model Number:HT106D

... >30mA >30mA Voltage Measurement (48v-250v/45-65Hz) Yes LCD Display Yes Backlight Yes Socket Connection Detection Correct connection Open ground Open neutral Open Live Live wire and ground wire reverse ...