110kv exploitation cable testing machine

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

...Cable 90° Bending Testing Cable Flex Cycle Test Machine Model:C5092 Purpose: Cable bending test machine is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable...

Brand Name:Fanke High-voltage

Model Number:CHX-810KVA/54KV,135KV

Place of Origin:China

...Test Set , For 35KV and 132KV Cable Test I. Product Usage : This test set model CHX-810KVA/54KV, 135KV is designed for 35KV and 110KV class XLPE cable on-site AC withstand voltage test with variable frequency resonant circuit technology; the highest test voltage is no more than 54KV or 135KV; test...

Brand Name:Fanke High-voltage

Model Number:CHX-810KVA/54KV,135KV

Place of Origin:China

...Test Set , For 35KV and 132KV Cable Test I. Product Usage : This test set model CHX-810KVA/54KV, 135KV is designed for 35KV and 110KV class XLPE cable on-site AC withstand voltage test with variable frequency resonant circuit technology; the highest test voltage is no more than 54KV or 135KV; test...

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some

Brand Name:AI

Model Number:CFRTM

Place of Origin:CHINA

...Testing Machine with Shock and Water Introduction This cable fire resistance testing machine to be used for testing cables required to maintain circuit integrity when subject to fire alone or fire with shock where the test condition is based upon flame with a controlled heat output corresponding to a temperature of at least 750˚C or fire with shock at a temperature of at least 830 °C. ​IEC 60331 Test for electric cables...

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made in China

...Test Left And Right Optical Cable Repeated Bend Testing Machine Model: C5092 Purpose: Cable swing test machine is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. Cables bend resistance testing method is short –circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable...

Brand Name:ZL

Model Number:ZL-1012

Place of Origin:China

... 0.8 mm thickness for testing. The Cable Slicing Skewing Machine consists of two parallel rollers with positive drive and a blade in the front so that the sample passes through the rollers and is sliced by the blade. The distance between the roller and the

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made in China

...testing of the multi-wires cable, communication cable, earphone cable etc. Cables bending resistance testing method is short –circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

...Cable Bending Cycle Testing Machine for Multi-wires Cable Model:C5092 Purpose: Cable bending test machine is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable...

Brand Name:ZL

Model Number:ZL-1027

Place of Origin:China

... at the cable, then to swing the jig right and leftwith the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested by connecting to the electricity. While the

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made in China

...Cable Bending Cycle Test Machine Wire Swing Left And Right Tester Model: C5092 Purpose: Cable bending cycle test machine is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. Cables bend resistance testing method is short –circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made in China

... cable, earphone cable etc. Cables flexible testing method is short –circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

...Cable Bending Cycle Fatigue Testing Machine Model:C5092 Purpose: Cable bending test machine is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable...

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some

Brand Name:ZL

Model Number:ZL-1048

Place of Origin:China

...Cable Fire Resistance Testing Machine Wire and Cable Fire Resistance Testing Machine(fire resistance test device): Compliance with Standards: Compliance with the British fire-resistant cable standard BS 6387-2013 "Specification for performance requirements of cables...

Brand Name:ZL

Model Number:ZL-1018

Place of Origin:China

...Cable Torsion Testing testing Machine Specifications: Wire Torsion Testing Machine Price mainly used to test the capacity of bearing deformation of the metal wires and other wire ropes whose diameter are φ 6~φ 20mm during the reversing. The test can show the surface defects of wire during the test process. ZL-1018 Wire Torsion testing Machine.pdf Technical parameters: Range of specimen diameter 0.1-1mm 1-3mm 3-10mm Test...

Brand Name:Infinity Machine

Model Number:RS-8116-6B

Place of Origin:Made in China

... Cable Bending Testing Machine/Cable Testing Equipment for Headphone Line or USB Line Model: RS-8116-6B Purpose: It is suitable for bending resistance test on headphone cable, USB cable, multicore cable conductor,flat cable and signal line,etc. The test ...

Brand Name:ZL

Model Number:ZL-1018

Place of Origin:China

...Cable Repeated Bending Testing Machine ​ Specifications: Wire Torsion Testing Machine Price mainly used to test the capacity of bearing deformation of the metal wires and other wire ropes whose diameter are φ 6~φ 20mm during the reversing. The test can show the surface defects of wire during the test process. ZL-1018 Wire Torsion testing Machine.pdf Technical parameters: Range of specimen diameter 0.1-1mm 1-3mm 3-10mm Test

Brand Name:AI

Model Number:AIC6223A

Place of Origin:China

...Test Machine is suitable for repeated U-shaped bending fatigue testing of high flexible cables such as TUV, VDE, UL, etc., in applications that require continuous bending and high-speed movement, such as internal wiring of machines, high-speed drag chain system cables, connecting cables of machine moving parts, internal wiring of machines, as well as repeated bending fatigue testing...