110kv exploitation cable testing machine

Brand Name:INFINITY

Model Number:IN-8100A

Place of Origin:Made In China

...jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested by connecting to the

Brand Name:I-SUNTOP

Model Number:is-4578PO

Place of Origin:china

... electronic universal testing machine is a high-precision, multi-purpose material testing machine that tests the mechanical properties of various metal materials, non-metal materials, composite materials, and polymer materials in the state of tension,

Brand Name:ZL

Model Number:ZL-1018

Place of Origin:China

... wire ropes whose diameter are φ 6~φ 20mm during the reversing. The test can show the surface defects of wire during the test process. Technical parameters: Range of specimen diameter 0.1-1mm 1-3mm 3-10mm Test speed 60 ,90, 120m/min 60, 90, 120m/min 30,

Brand Name:ZL

Model Number:ZL-1027B

Place of Origin:China

... standards "General safety requirements for flexible cord components and power cords". It is suitable for bending test of power cord and DC cord by related manufacturers and quality inspection departments. It is used to test the bending resistance and

Brand Name:Herrman

Model Number:GLW-30

Place of Origin:China

...cable tension testing machine tension tester Description The equipment is used to test optical cable tensile properties within the prescribed tensile load (that is usually tensile properties during installation), that means optical fiber attenuation, optical fiber strain, and function relation of optical cable...

Brand Name:AI

Model Number:AIC-6171A

Place of Origin:CHINA

... standards: ● GB/T2951.13-2008 Sect 9 ● GB/T12706.1-2008 Sect 18.13 ● IEC 60811-1-3 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables - Part 1-3: General Application - Section 3: Methods for Determining the

Brand Name:Infinity Machine

Model Number:RS-8116-6A

Place of Origin:Made in China

... conductor, flat cable and signal line, etc. The test method is as follows: Firstly, clamp one end of the wire rod and fasten it to the rotation clamp. Then have it make a horizontal rotation with hanging load to evaluate whether ...

Brand Name:AI

Model Number:FIPEC

Place of Origin:CHINA

...Cable Vertical Flame Spread Testing Machine Introduction EN 50399 specifies the tester and methods of test for the assessment of vertical flame spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. EN 50399 details the test machine...

Brand Name:AI

Model Number:AIC-6034A

Place of Origin:CHINA

... Core which can not make Dumbbell test specimen(Shorter axis of sheath≦20mm flat cable). Reference standards ● GB2951.14-2008, Sect 8.1&8.2 Common test methods for insulating and sheathing materials of electric and optical cables - Part 14: Methods for

Brand Name:Infinity Machine

Model Number:RS-8105A-5

Place of Origin:Made in China

... and signal cables. Test methods: make one end of the cable short connected and clamped, fix it on a rotating disk, and then make it rotate laterally under certain hoisting weight (load) to assess whether the cable is well conducted after the many times.

Brand Name:Infinity Machine

Model Number:RS-8105A-5

Place of Origin:Made in China

...Test Machine High Precision With 7" Touch Panel Model: RS-8105A-5 Purpose: The tester is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is short –circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some rotation testing

Brand Name:Infinity Machine

Model Number:IN-8100A

Place of Origin:Made In China

...jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested by connecting to the

Brand Name:Infinity Machine

Model Number:IN-8100A

Place of Origin:Made In China

...jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested by connecting to the

Brand Name:AI

Model Number:AIC22161

Place of Origin:China

...cable splicing machine is a necessary test apparatus for sample XLPE cables 35KV and below for the mechanical and physical property tests. The traditional rotary slicing blades is changed to translational slicing blades, being allocated to complete the hot set test and tensile test...

Brand Name:PTE

Model Number:Computer Control Electronic Pendulum Impact Testing Machine Under Dynamic Loads

Place of Origin:China

Computer Control Electronic Pendulum Impact Testing Machine Under Dynamic Loads The pendulum returns to its initial position by exploiting the remaining energy when specimen breaks, getting prepared for the next impact. This product is reliable, stable...

Brand Name:ZL

Model Number:ZL-1009

Place of Origin:China

... elongation. The tester is testing elongation of metal materials; Using advanced software program and sophisticated electronic sensing technology to measure the elongation of tensile specimen, ...

Brand Name:INFINITY

Model Number:IN-8100A

Place of Origin:MADE IN CHINA

...jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested by connecting to the

Brand Name:Infinity Machine

Model Number:IN-8100A

Place of Origin:Made In China

...jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested by connecting to the

Brand Name:HongCe

Model Number:HC9918

Place of Origin:China

...Cable Torque Testing Machine Torque 0.10Nm Tensile Strength Testing Machine Product introduction:Product Introduction HC9918 soft cable torque test device has become a powerful assistant in the field of soft cable testing with its advanced design and reliable performance. It simulates the torque scenarios in actual use and conducts rigorous tests on soft cables...

Brand Name:ZL

Model Number:ZL-2110

Place of Origin:China

...Cable Torsion Strength Testing machine For Metal The main purposes: Automatic Wire and Cable Torsion Tester is suitable for the determination of diameter (or feature size) for metal wire 0.1-10.0mm under the plastic deformation ability and display defects of wire surface and interior in one-way or two-way torsion. Main technical parameters: Product Name Automatic Wire and Cable...